<p>1.3inch LCD Display Module For Pico</p> <p>Embedded ST7789 Driver, Using SPI Bus</p> <p>For Pico Header Compatibility</p> <p>Onboard Female Pin Header For Direct Attaching To Pico</p> <p>1x Joystick And 4x User Buttons For Easy Interacting</p> <p>Operating voltage: 2.6~5.5V</p> <p>Resolution: 240x240 pixels</p> <p>Communication interface: 4-wire SPI</p> <p>Display size: 23.40 x 23.40mm</p> <p>Display panel: IPS</p> <p>Pixel size: 0.0975 x 0.0975mm</p> <p>Driver: ST7789</p> <p>Dimensions: 52.00 x 26.50mm</p> <p>LCD and the controller</p> <p>The ST7789VW is a single-chip controller\/driver for 262K-color, graphic type TFT-LCD. It consists of 240 source line and 320 gate line driving circuits. The</p> <p>resolution of this LCD is 240(H)RGB x 240(V), it supports horizontal mode and vertical mode, and it doesn't use all the RAM of the controller.</p> <p>This LCD accepts 8-bits\/9-bits\/16-bits\/18-bits parallel interface, that are RGB444, RGB565, RGB666. The color format used in demo codes is RGB565.</p> <p>This LCD uses a 4-line SPI interface for reducing GPIO and fast speed.LCD</p> <p>Note: Pico is NOT included.</p> <p>color:Blue</p> <p>Material:PCB</p> <p>Package Contents:</p> <p>1 x Pico-LCD-1.3</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>