Intelligent LCD screen with backlight can display working time, speed percentage, current mode, forward/reverse status, etc. Equipped with wireless remote control. Multiple limit modes available. Can set slow start and slow stop time. Adjustable upper and lower speed limits. The total working time can be set to stop at the designated time. Support dual speed control for separate speed regulation of forward and reverse speeds. There are two modes available: manual and automatic. The automatic mode is fully automatic for forward and reverse rotation within the set time. Gently touching the switch to switch between forward and reverse rotation, and jogging acceleration and deceleration solves the problem of traditional potentiometers being prone to damage. Input voltage: DC10-55V (specific voltage is equal to the rated voltage of the motor) Output voltage: linear under load Instantaneous current: 50A Continuous current: within 30A Forward to reverse: supported Wireless remote control: Yes Timing: Yes Limit function: Yes Slow start and slow stop: configurable Speed digital display: 0-100 percentage meter Speed regulation type: current regulation Speed regulation method: jog+- Speed regulation range: 0- Control frequency: 15KHZ Wiring type: fence type terminal blocks Supporting motor: Brushed motor Module size: length x height x depth 105mm x 70mm x 95mm Net weight of product: 275 grams Panel opening: length x width 98mm x 63mm Installation method: embedded Long and hold the MENU key to turn off and turn on the backlight To reverse start, FWD/REV to reverse start Attention:The input must be divided into positive and negative. The input voltage must be equal to the rated voltage of the motor (within 10-55V) For example, the rated voltage of the motor is 12V, and the input voltage of the governor is 12V. The rated voltage of the motor is 36V, and the input voltage of the governor is 36V<