Item Type: Air Distribution Block <br>Material: Aluminum + Stainless Steel <br>Pressure Resistance: 1.0MPA (10kgf/cm) <br>Working Pressure: 0-0.9Mpa (0-0.92kfg/cm2) <br>Adaptation Temperature: 0-60℃ <br>Connector Inner Diameter: Approx. 13mm / 0.5in <br> <br>Specification: <br> <br>ModelTotal LengthWays / HolesLength x WidthThreadCenter Spacing <br>SML-265mm / 2.6in2 Ways 5 Holes20 x 20mm / 0.8 x 0.8inG1/4(12mm)30mm / 1.2in <br>SML-395mm / 3.7in3 Ways 6 Holes <br>SML-4125mm / 4.9in4 Ways 7 Holes <br>SML-5155mm / 6.1in5 Ways 8 Holes <br>SML-6185mm / 7.3in6 Ways 9 Holes<br>1、[ALUMINUM MATERIAL] The air distribution block is made of pure aluminum, wear and corrosion resistant, and not easy to rust. <br>2、[STAINLESS STEEL BEAD] The connector has built in high strength stainless steel bead, with tight buckle, and the operation is simple. <br>3、[EASY TO INSTALL] The multiple way manifold block is small and compact, easy to install and has good airtightness. <br>4、[WORKING PRESSURE] Working pressure is 0?0.9Mpa (0?0.92kfg/cm2), with standard G1/4 thread, wide application range. <br>5、[APPLICABLE SCENES] Widely used in engineering projects such as factories, automation equipment, auto repair, electronics, etc.1. Do not unplug and insert the hose frequently during the use of the connector, which will affect the service life of the connector and hose <br>2. The pipe inserted into the connector needs to be inserted to the bottom of the joint to avoid the possibility of air leakage <br>3. When pulling out the hose, first confirm that there is no pressure in the tube, press the end cap of the joint to the end and pull out the hose1 x Air Distribution Block