〓► [VERY IMPORTANT STEPS]: Step-1; Wipe down the walls with paper and dry towels. 2nd step; Remove the film from the suction cup. Step-3; Pull the protruding part up, tighten the wall and squeeze the air out of the suction cup. Wait 10 minutes before using. Step-4; Attach the shower head to the holder and turn the top disc clockwise to tighten it. 〓► [Large Adsorbability]: The suction of this suction cup shower head holder is 2-3 times that of ordinary suction cup. If the concave convex surface is less than 1cm, it will automatically fill. Impermeable moisture, adsorption more solid, not easy to fall. 〓► [5 Angle Adjustable Modes]: Shower head for 3/4 " " standard connector, suitable for hand shower and bath bidet, with 5 modes, 45 degree adjustable , the reasonable design makes the bath more convenient. 〓► [Scope]: The universal shower holder is suitable for flat smooth surfaces, ceramic tiles, smooth glass, stainless steel ect. Scope of application: The shower holder is suitable for flat and smooth surfaces, tiles ceramic, smooth glass, stainless steel ect. Wood surface, granite, wallpaper, painted wall, latex paint, natural marble and other non-smooth walls, need to use auxiliary stickers. Provide auxiliary stickers. 〓► [Easy to Install and Reusable]: No drilling, simple and easy installation and operation effortlessly and quickly, leaves no marks after removing the bracket. You can replace the shower or bidet bracket at any time. where, so that the stand can be reused and dismantled. High or low bathing position for children or parents who cannot reach the shower head. Features: The suction cup will automatically fill the convex surface to within 1 cm. The strength of the suction cup is 2-3 times that of the ordinary suction cup. Suitable for handheld shower heads and bath bidets. With 5 modes, adjustable to 45 degrees. The shower holder is suitable for flat and smooth surfaces. The shower holder is easy to install and remove. Installation guide: 1. Wipe down the walls with paper and dry towels. 2. Remove the film from the suction cup. 3. Pull the protruding part up, tighten the wall and squeeze the air out of the suction cup. 4. Attach the shower head to the bracket and turn the top disk clockwise to tighten it. Specification: Material: high-tech plastic (ABS) Size: 14.8cm * 7.5cm (L * W) Color: silver The package includes: 1 * Shower head holder