M.2 B+M AQC107 10G embedded industrial-grade network adapter, using high-performance Marvell AQC107 Ethernet controller. Marvell AQC107 controller has Base-T copper network interface, supports 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T /100BASE-T and PCIe Gen3x4 or Gen2x4, AQtion Ethernet controller can easily handle 10GbE lines speed performance. The AQC107 incorporates Aquantia's AQrate® PHY technology to deliver 10GbE networking speeds over Cat 6a and 5 GbE and 2.5 GbE networking speeds over 100 meters of Cat 5e or better cable, enabling higher data rates , with zero changes to conventional wiring. Designed for: Any mobile device, desktop, workstation, value server or industrial design with strict space constraints. System Requirements:- Win 7/ Win 8/Win 8.1/Win 10/Server 2012/ Server 2016 32 or 64bits, Linux Kernels3.10 and above, available M.2 B+M KEY slot. Compliant with PCIE Express Revision 3.0 and downstream PCI Express Reivison2.0. Each line supports 8.0GT/s and 5.0GT/s line speed. Support Gen3 x4 or Gen2 x4. Support communication and management functions. Integrated Aquantia AQrate PHY with NBASE-T Technology. Support PHY specification through 10GBASE-T /5GBASE-T /2.5GBASE-T /1000BASE-T /100BASE-T. On-chip high-resolution cable analyzer for advanced cable diagnostics Energy Efficient Ethernet (EEE) support Support IEEE1588v2 precision time protocol Supports large send offload, receiver scaling (RSS), direct cache access (DCA) and headers Checksumming improves network performance and reduces host CPU utilization Wake-on-LAN (WoL) power management Supports IPv4, IPv6 and IPv6/UDP checksum offload Supports jumbo frames (up to 16kbytes) Quality of Service (QoS) Supports up to eight traffic classes and Data Center Bridging (DCB) Chip processor:Marvell/AQC107 Applicable network:10GbR server network card Main controller:Marvell AQC107 Bus type:M.2 B+M KEY Media in