Safe Voltage: The Car Speaker Switch uses 7A/12V power supply, maximum 10A/12V, voltage range: 0-220V, the higher the voltage, the lower the current. Lightweight and Compact: Paste Type Car Rocker Switch is S and portable. It has a rectangular design. The keys are sensitive and will not trigger by mistake. Simple to Install: Horn Rocker Switch is installed with double-sided tape and will not damage the original structure. You need to clean the location before installing. Simple to Install: Horn Rocker Switch is installed with double-sided tape and will not damage the original structure. You need to clean the location before installing. Widely Used: Push Button Rocker Switch is used as a trigger switch, horn switch, ignition switch, and other function trigger switches. This is widely used. Description Correct use of double-sided tape: 1. This product is suitable for sticking on planes such as glass, wood, and light-textured plastics. Do not stick on plush material. 2. It needs to be wiped clean and then pasted. After pasting, try to press for 3 seconds or press the four corners for better effect. In particular, the uneven surfaces must be pressed for more than 5 seconds because the contact surfaces with the adhesive becomes Ser. Do not deliberately shake the buckle to test the stickiness. Because double-sided tape generally takes more than 48 hours to exert its maximum viscosity and stabilize. Specification Name: Car Rocker Switch Power cord length: 50cm Wire: 2P 18th wire, wire thickness: 0.75 flat Wire outer diameter: 2mm*2 Wire withstand temperature: -40 to +105 Recommended range of current: 12V/15A 24V/12A 120V/10A 220V/6A Switch mode: off-on. (press to open, release hand to reset to close) Packing list 1 x Car Rocker Switch