Shop name:Chong Qing Shuo Yue Ke Ji You Xian Gong Si Can be widely used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, N-channel and P-channel MOSFETs, IGBTs, JFETs, thyristors, batteries, etc. Zener diodes can also be detected and have a functional -calibration. After the detection is completed, the infrared remote control at the "IR" light, and then press the button on the remote control. If the detector decodes successfully, the data code and infrared waveform will be displayed. One-key operation, automatic detection and shutdown, you can also press the multi-function button to turn off the detector. Place the pins of the components in the corresponding area, turn the small handle, the detector will automatically detect, and the final result will be clearly displayed on the backlit TFT screen. of the usual black and white display, this detector will display the results in color. Mode: Rechargeable Lithium Battery Display: 3.5 x 3cm TFT screen Diode Range: Less than 4.5V Zener diode: transistor detection area: 0.01-4.5V Zener diode detection area: 0.01-30V Triac Range: IGT Less than 6mA Capacitance: 25pF- 100mF Resistance: 0.01-50M Inductance: 0.01mH-20H Battery: 0.1-4.5V Product chip: DIY Supplies: ELECTRICAL AC Voltage: multimeter Display Type: Digital display : 3.7V AC Current: MOSFET DC Current: Operating Mode: Handheld Number: -TC1 Dimensions: 70 x 90 x 28MM Operating Temperature: 0 - 40 color:Photo color Material:plastic Package Contents: 1 x TFT Transistor Tester 1 x Electronic components set 1 x USB Cable 3 x Test Only the above package content, other products are not included. Note: Light reflection and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.