1 3 8 Bit AC 220V Optocoupler Isolation Module Voltage Detect Board Adaptive 3-5V For PLC Isolamento Fotoaccoppiatore Module

169,00 RON
+ 31,49 RON Livrare

1 3 8 Bit AC 220V Optocoupler Isolation Module Voltage Detect Board Adaptive 3-5V For PLC Isolamento Fotoaccoppiatore Module

  • Marcă: Unbranded

1 3 8 Bit AC 220V Optocoupler Isolation Module Voltage Detect Board Adaptive 3-5V For PLC Isolamento Fotoaccoppiatore Module

  • Marcă: Unbranded
138
Preţul de vânzare recomandat: 329,00 RON
Preţ: 169,00 RON
Economisiţi: 160,00 RON (48%)
169,00 RON
+ 31,49 RON Livrare

În stoc

Acceptăm următoarele metode de plată

Descriere

1 way 220V AC electro-optic coupler detection module Function: It can be used to detect the existence of 220V ac Output TTL level can be detected by SCM. It could be 3-5V PLC24V level can also be connected When connected to the PLC input, the PLC COM end is connected to the power supply 24V input end is connected to the signal output OUT of the board, and GND on the optocoupler board is connected to the negative pole of the power supply Green 2P 5.0 terminal is connected to 220V voltage The 3P terminal is connected to the SCM input. The board size is 73mm X15mm Safety warning: In practice, any device in the white wireframe on the plate should not be touched after the module is powered on. Because it is high voltage. Pay attention to the safety of electricity. 3-Way description: 1. Function: Test the existence of AC 220V; When there is 220V, the optocoupler can be grounded; Otherwise, it doesn't work 2. Output high/low level: SCM IO interface can be directly connected for testing with a voltage of 3-5V 3. Adaptable to PLC connection, compatible with almost all PLC input 8-Way description: Function: Test the existence of AC 220V Output TTL level: Can be tested using MCU, voltage is 3-5V The output can be connected to PLC 24V Connection: When connecting PLC input, THE COM terminal of PLC is connected to the 24V power supply, the input terminal is connected to the signal output S1-S8 of the board, and the optocoupler GND is connected to the negative pole of the power supply. Blue terminal 5.0 connects 220V voltage and yellow pin signal output. When 220V voltage is normal, output low level; When 220V power off, output high level. Note: After the module is powered on, do not touch any part of the white line frame on the board, because it is high voltage. Pay attention to electrical safety. _x000D_
  • ID Fruugo: 189066816-403862906
  • EAN: 9334123821633

Informații privind siguranța produsului

Vă rugăm să consultați informațiile despre siguranța produsului specifice acestui produs prezentate mai jos

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Etichete de siguranță pentru produse

CE Mark

Livrări şi Returnări

Shenzhen Winway Electronics

Adresă: D11-1, U Chuanggu, Niulanqian, Minzhi Street, Longhua New District, Shenzhen, 518000, China

Vă rugăm să consultați informațiile de conformitate specifice acestui produs prezentate mai jos.

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Producător:
În continuare se prezintă informațiile de contact ale producătorului produsului relevant vândut pe Fruugo.

  • Shenzhen Winway Electronics Co.,ltd
  • Shenzhen Winway Electronics Co.,ltd
  • D11-1, U Chuanggu
  • Niulanqian, Minzhi Street, Longhua New District
  • Shenzhen
  • CN
  • 518000
  • 83250625@qq.com
  • 13714675202
  • https://www.fruugo.co.uk/shenzhen-winway-electronics/m-15069

Persoana responsabilă în UE:
În continuare se prezintă informațiile de contact ale persoanei responsabile din UE. Persoana responsabilă este operatorul economic desemnat, cu sediul în UE, care este responsabil pentru obligațiile de conformitate referitoare la produsul relevant vândut în Uniunea Europeană.

  • EUBRIDGE ADVISORY GMBH
  • EUBRIDGE ADVISORY GMBH
  • Virginia Str2, 35510 Butzbach, Hessen, Germany
  • Butzbach, Hessen, Germany
  • DE
  • 35510
  • Hunter@pokza.com
  • 68196989045