Digital meter 2in1 ZOYI ZT-702S with built-in oscilloscope 10MHz necessary in every electrical, electronic workshop as well as at home. Easy to use. Compact and compact design equipped with a tilting stand for easy observation of measurements and a protective flexible housing to protect against mechanical damage. Characteristic Large full screen IPS color display 2.8 inch 320x240pix. Thanks to the high resolution of the displayed image and large font, the meter allows for comfortable work in all lighting conditions. An additional set of precision sharp pin cables is ideal for measuring small elements, and for car diagnostics, where connectors are delicate (ECU) and standard wires can damage them. Thanks to the 2in1 functionality of the meter and oscilloscope, the device can measure various electrical parameters and display the waveform and spectrum of electrical signals. Oscilloscope function The oscilloscope corresponds to za automatic identification of the waveform type and adjustment of the control method to accurately display the waveform of the input signal. Support for wave measurement is carried out za the single-channel bandwidth of 10MHz and the sampling rate of 48MSa/s in real time. Technical data Power supply: built-in battery (included), material: plastic, weight: 345g, dimensions: 177x89x40mm, operating temperature: 0C 40C, sampling: 48MSa/s, display: LCD 3-inch color IPS. power supply za battery: 18650 3.7V charging za via USB-C cable compliant with safety level CTA III 1000V, oscilloscope mode CTA II 600V double ceramic fuse 200mA 10A wide application in work with electronics Application Due to the wide range of applications of the digital oscilloscope 2in1 ZOYI ZT-702S is used in: car diagnostics: battery, alternator, fuses, switch, relays, ignition system, battery current consumption with engine off, home electronics: wires, sockets, electronic equipment, service: electric and electronic, education: education and didactics. Measuring ranges The ZOYI ZT-702S 2-in-1 oscilloscope gauge is characterized by the following measurement ranges and parameters: solid voltage (V): DC 999.9mV-999,9V, (0,5% 3), solid voltage (mV): DC 9,999mV-99,99mV, (0,5% 3), alternating voltage (V): AC 999,9mV-750V, (1,0% 3), alternating voltage (mV): AC 9,999mV-99,99mV, (1,0% 3), direct current (A): 9,999A-10A, (1,0% 3), direct current (mA): 99,99mA-9999uA, (0,8% 3), alternating current (A): 9,999mA-10A, (1,2% 3), alternating current (mA): 99,99mA-9999uA, (1,0% 3), resistance: 0-99,99 mOhm, (3,0% 5), capacity: 9,999nF-99,99mF, (5,0% 5), frequency: 40Hz-1kHz, (0,1% 2), temperature: -20 - 1000C, (2,5% 5), sound signaling: < 30Ohm, oscilloscope bandwidth: 10MHz, Real-time sampling speed: 48 MSa/s