1、2 IN 1 DEVICE: The SA6 spectrum analyzer comes with a built in signal generator. When not used as a spectrum analyzer, it can be used as a signal generator. 2、WIDE FREQUENCY RANGE: Spectrum display range 35MHz to 6200MHz. Placing an external antenna on a base station for fast analysis of the RF environment. Checking proper operation, repairing, and adjusting repeaters, generators, filters, etc. Measuring SWR using an external directional coupler. 3、VERSATILE ANALYZER: The spectrum analyzer identifies the amplitude and frequency components of the analyzed process. It can handle signals from all commonly used technologies, Wi Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc. 4、TRACKING GENERATOR FEATURE: Another important feature is the additional function of the tracking generator, enabling measurements of passive or active devices such as filters or amplifiers. The software allows SWR measurements and return loss module measurements. This requires an external directional coupler and a set of calibration measures. 5、3.2 INCH TOUCHSCREEN: The 3.2 inch color screen provides real time viewing of test data. It is highly responsive, and we equipped it with a stylus. 6、PC SOFTWARE CONTROL: SA6 spectrum analyzer can be connected to a PC via USB to transfer data to the PC. With PC software control, you can analyze data more conveniently and make further adjustments. Item Type: Spectrum Analyzer Signal Generator Material: Aluminum alloy Battery: 1 x Polymer Battery (3000mAh included) Display Frequency Range: 35-6200 MHz Measurement Frequency Range: 35-4500 MHz Dynamic Range (35-3000 MHz): 75 dB Dynamic Range (3000-4500 MHz): 70 dB Maximum Span: 6165 MHz Bandwidth: 200 kHz (fixed) Scan Speed for Frequency Range over 100 MHz: 700 MHz/sec Scan Speed for 100 MHz: <0.25s Background Noise up to 3000 MHz: <-100dBm Background Noise 3000-4500 MHz: <-95dBm Background Noise 4500-6200 MHz: <-90dBm Impedance: 50 ohms VSWR within Operating Frequency Range: <1.5 Internal Attenuator: 0-30 dB Measurement Error at 10 dB Attenuation: ±2 dB Measurement Error at 20 dB Attenuation: ±5 dB Measurement Error at 30 dB Attenuation: ±8 dB Tracking Generator Output Power: -15 to -25 dBm Accuracy within Dynamic Range: ±2.0 dB Maximum Input Power at 0 dB Attenuation: 10 dBm Maximum Input Power above 20 dB Attenuation: +20 dBm Maximum Input Signal: +10 dBm Maximum Input DC Voltage: 25V Maximum Current Consumption when using Battery: 450 mA Maximum Current Consumption when using USB: 500 mA (during charging) 1 x Spectrum Analyzer 1 x USB Cable 2 x For SMA RG316 RF Cable (30cm)1 x For SMA KK Female Connector 1 x Stylus Pen 1 x Hanging Rope 1 x User Manual