<p>Compliant with most standard receiver connector: Futaba, Hitec, , etc.</p> <p>Stall torque: 12kg\/cm(6V), 13kg\/cm(7.2V).</p> <p>Power Supply: Through external adapter, connector wire length 300mm. Stable and shock proof, motor, metal gear.</p> <p>This high-speed standard servo motor can rotate 180 degrees (90 in each direction).</p> <p>Gear Type: All Metal Gears. 180 degree rotation. Controllable angle range from 0 to 180 degrees, excellent linearity, precision control. Can be rotated within 360 degrees when power off.</p> <p>Specifications: Connector Wire Length 300mm\/11.8 inch</p> <p>Operating Speed: 0.17sec \/ 60 degrees (4.8V no load) - 0.13sec \/ 60 degrees (6.0V no load)</p> <p>Operation Voltage: 3.0V - 7.2V</p> <p>Gear Type: All Metal Gears</p> <p>Dead Band Width: 4usPlug</p> <p>Specification: JR FUTABA and so on</p> <p>Temperature range: -30 - +60deg</p> <p>Servo Weight: 55g</p> <p>Gear Type: All Metal GearsPower Supply: Through External AdapterStable and Shock ProofCompliant with most standard receiver connector: Futaba, Hitec, , etcGreat for biped robot \/ robot \/ remote control car, suitable for models of 50-90 methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft Note: Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can;t turn up to claimed degree.</p> <p>Connection: Red Wire: +Yellow Wire: PWM\/Signal Brown Wire: GND</p> <p>Control Specifications: Control : PWMPulse Width: 500-2500Duty Ratio: 0.5ms-2.5msPulse Period: 20ms</p> <p>size: 40.7 x 19.7 x 42.9mm</p> <p>Material:ABS+Metal</p> <p>colour:black</p> <p>Package Contents:</p> <p>4 x for Servo</p> <p>4 x Servo Horn Kit</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>