5Pcs Thread Inserts Male Female Reducing Nut Repair Tool Stainless Steel Fastener M24x3x1D

74,00 RON
Livrare GRATUITĂ

5Pcs Thread Inserts Male Female Reducing Nut Repair Tool Stainless Steel Fastener M24x3x1D

  • Marcă: Unbranded
Vândut de:

5Pcs Thread Inserts Male Female Reducing Nut Repair Tool Stainless Steel Fastener M24x3x1D

  • Marcă: Unbranded
Preţul de vânzare recomandat: 94,00 RON
Preţ: 74,00 RON
Economisiţi: 20,00 RON (21%)
Vândut de:
74,00 RON
Livrare GRATUITĂ

În stoc

Acceptăm următoarele metode de plată

Descriere

Feature:1. Fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials to form a highstrength, wearresistant, highaccuracy standard female thread2. You can repair the threaded hole in a costeffective manner when a thread error occurs or a damaged female threaded hole is repaired3. Very convenient and fast to use wire thread inserts to convert between metric and inch thread holes4. Wire thread inserts are threaded sheaths, stainless steel threaded sleeves, wire sleeves. Made of highstrength, highaccuracy diamondshaped crosssection steel wire5. Applied to lowstrength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., will improve thread strength and wear resistance significantlySpecification:Item Type: Thread InsertsMaterial: SUS304Model: M24x3x1DThread Specification: M24x3 (mm)Length After Installation: Approx. 24mm / 0.9inNumber of Turns Before Installation: 6.3Outside Diameter Before Installation: Approx. 28.5 ~ 29.1mm / 1.1 ~ 1.1inDiameter of Drilling Drill Bit for Installation: Approx. 24.8mm / 1inThread Protective Sleeve Model Specification Description: For Example: M3x0.5X1.5D, which means that after the screw set is completed, the female thread is M3, the pitch is 0.5, and the length is 1.5D (length refers to 1.5 times the diameter, that is, 1.5x3=4.5mm ), the length here refers to the length after installation.How to Use:1. DrillingUse the drill bit of the size listed in the parameter table of the wire thread insert to drill the hole. Be careful not to drill the hole into a cone shape. The chips generated by the drill hole must be blown out with compressed air. After drilling, the counterbore should not exceed the depth of 0.4 pitch. Too large counterbore is not conducive to the screwing of the wire thread insert.2. TappingUse special taps for wire thread inserts to tap. The depth of the tapping must exceed the installation length of the thread inserts. After tapping, use a compressed air spray gun to blow out the debris. When the thread accuracy is high, check the tapped bottom hole with a special bottom hole plug gauge for wire thread inserts.3. InstallationPut the wire screw sleeve into the installation wrench (figure 5 on the right), insert the wire screw sleeve installation tail handle into the guide rod groove of the installation wrench, and turn the handle of the installation wrench to screw the wire screw sleeve into the screw hole. For installation of M14x2 or more phase thread thread inserts, you can use the "T" type slotting simple tool to install; Note: During the installation and screwing process of the thread inserts, there should be no pressing in the vertical direction to prevent jumping teeth. The correct method is slowly screw in the direction of thread rotation.4. Remove the handle (break off the mounting handle)Use a breaker to break the mounting handle. Use about 200g of coconut to hit the breaker instantly, and the handle can be removed. Do not use the mounting wrench to rotate in the opposite direction. Do not break the mounting handle. This situation is very easy. As a result, the tail shank was broken and the wire was pulled out.5. UnscrewWhen installation problems occur during the installation of the wire thread insert (such as jumping teeth), the thread insert needs to be removed, and a special sleeve remover should be used to remove the wire thread insert..Package List:5 x Thread Inserts
  • ID Fruugo: 420601728-886222709
  • EAN: 7847689939657

Informații privind siguranța produsului

Vă rugăm să consultați informațiile despre siguranța produsului specifice acestui produs prezentate mai jos

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Etichete de siguranță pentru produse

CE Mark
Avertismente de siguranță: Warning: Please read the product instructions carefully before use to ensure correct use.
Număr de serie: 7847689939657

Livrări şi Returnări

Expediat în 2 zile

  • STANDARD: GRATUIT - Livrare între mie. 22 octombrie 2025–mie. 29 octombrie 2025 - GRATUIT

Livrare de la China.

Facem tot ce ne stă în putinţă să ne asigurăm că produsele comandate de dumneavoastră vă sunt livrate în întregime şi conform specificaţiilor. Cu toate acestea, dacă primiţi o comandă incompletă sau articole diferite de cele comandate, sau aveţi alt motiv pentru care nu sunteţi mulţumit de comandă, puteţi returna comanda sau orice produse incluse în comandă şi primiţi o rambursare completă pentru articole. Vizualizaţi întreaga politică de returnare

Detalii de conformitate a produsului

Vă rugăm să consultați informațiile de conformitate specifice acestui produs prezentate mai jos.

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Producător:
În continuare se prezintă informațiile de contact ale producătorului produsului relevant vândut pe Fruugo.

  • Shenzhen Gujun Technology Co., Ltd.
  • Shenzhen Gujun Technology Co., Ltd.
  • 1303, 13/F, Tower B, TCL Building, No. 6 Gaoxin Nandao Road, Yuehai Street
  • Nanshan District
  • Shenzhen
  • Guangdong
  • CN
  • 518067
  • idyaiy16984@163.com
  • 13038870349
  • https://hengruigongju.1688.com/page/index.html?spm=0.0.wp_pc_common_header_companyName_undefined.0

Persoana responsabilă în UE:
În continuare se prezintă informațiile de contact ale persoanei responsabile din UE. Persoana responsabilă este operatorul economic desemnat, cu sediul în UE, care este responsabil pentru obligațiile de conformitate referitoare la produsul relevant vândut în Uniunea Europeană.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795
  • https://www.ozon.ru/seller/topstore-600244/products/?miniapp=seller_600244&__rr=1&abt_att=1