The 5V to 12V DCDC Boost Converter Module is a compact boost converter designed to take a 5V to 11V input and provide a 12V output with a maximum current of 1A. It is intended for applications where a stable 12V supply is needed from a lower voltage source, such as USB power or other 5V sources. Key benefits Enables 12V operation from common 5V sources such as USB power banks or other 5V supplies, expanding the use of lowvoltage power for 12V devices. Simple module format that integrates easily into projects and systems without complex wiring. Supports up to 12V output at up to 1A, allowing modest 12V peripherals to run from a 5V–11V input source. Key attributes Functionality: DCDC boost converter module (stepup) Input range: 5V to 11V Output: 12V, up to 1A Purpose: Boost voltage from a lowervoltage supply to a 12V load Applications and use cases Portable projects: Run a 12V relay or small actuator from a USB power bank or other 5V source. Embedded electronics: Power 12V peripherals (sensors, modules, or indicators) from a 5V microcontrollerbased system. Light to medium load devices: Supply small 12V devices such as compact motors or LED lighting strips from a 5V source, within the 1A output limit. How to use Connect a 5V–11V input power source to the input of the module. Connect the 12V load to the module's output, ensuring the load current does not exceed 1A. Verify that the input source can supply the current for the boost operation. Notes Output is 12V up to 1A given appropriate input conditions; input voltage must remain within 5V–11V. Ensure the connected load does not draw more than the rated current to maintain performance and safety.