AMBERKLENE FE10 is a fast evaporating solvent blend which contains no CFCs or other chlorinated solvents. It is an ideal alternative to1-1-1 Trichloroethane.APPLICATIONSA highly effective degreasing agent for all hydrocarbon soiling - including: Oil Grease Tar and Bitumen For use in numerous industries where a fast and effective cleaning solvent is required - including: Office Equipment PCBs and Electronics Textiles Moulding Automotive Offshore Printing Agriculture Aviation Marine Electric Motors Light and Heavy Engineering Efficiently cleans plastics - ferrous and non-ferrous metals; evaporating quickly to leave a clean - dry surface. Also recommended for spot removal in the textiles and associated industries.N.B. May affect certain plastics. Always test a small - inconspicuous area before general use. Ensure electrical equipment is switched off before cleaning Appearance : Clear - colourless liquid Odour : Mild and sweet Specifications/Approvals : NATO Catalogue No. 6850-99-6636478 SG @ 25C : 0.770 Pressure @ 25C : 5 - 6 Bar Discharge rate : 2.5 g/sec Kb value : 75 Initial boiling point : 64C Freezing point : Below -50C Evaporation rate : 6.0 (with respect to Butyl Acetate) Flammability : Classified as extremely flammable under Current EC Regulations Flashpoint -18C (Bulk) Packaging : 5 litres STORAGEThe product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.