Automatic Melting Strapping Tool for Fast, Secure Banding Key benefits Fully automatic weld and cut: Insert the strap, press the tension button to tighten, then press the welding switch. The tool automatically melts the strap joint and trims excess, producing a secure seal in a single sequence. Saves time and labor: automation and quick cycle time let one operator complete strapping tasks fast. Typical bundle operations such as timber packs can be completed in under one minute. Easy to use for anyone: Designed for nonprofessional and professional users alike. Large tightening force handles heavyduty packaging while the tool plus battery weighs only 6.6 lbs, making it easy for users with limited strength to operate. Portable and battery powered: Builtin 4000 mAh rechargeable lithium battery supports cordless operation. A 90 minute charge yields about 2 hours of working time and is capable of packing roughly 250 to 350 straps per charge. Function and performance Operation steps: feed strap into the baler, press the tension button to tighten, then press the welding switch. The machine will weld the strap junction and automatically cut off excess material. Adjustable tension: Pulling force can be set by the adjustable knob from 900 to 3200 N to match different load and strap requirements. Strap compatibility: Compatible with PP and PE straps 11 to 16 mm wide (0.43 to 0.63 inch) and 0.4 to 1.2 mm thick (0.01 to 0.04 inch). Battery life and durability: 4000 mAh rechargeable battery, rated for up to 2000 charge cycles. Typical percharge output is 250 to 350 straps with about 2 hours of continuous use after a 90 minute charge. Key attributes Portability: Handheld design and low weight including battery (6.6 lbs) for easy transport and handheld operation. Material compatibility: Works with common plastic strapping materials PP and PE in the specified width and thickness ranges. tightening capacity: Adjustable tension up to 3200 N for secure handling of medium and heavy loads. Practical applications Timber bundling: Rapidly and securely band packs of lumber for storage or transport with consistent welds and trimmed ends. Pallet and carton packaging: Use for consolidating pallet loads or grouping cartons for warehouse handling and . Construction and building materials: Secure lengths of pipe, rebar, or other construction materials on site without needing fixed power or heavy tools. Usage tips Match strap size: Use straps within the stated width and thickness ranges for reliable welds and cutting. Set tension appropriately: Adjust the knob to the lowest effective tension for delicate bundles and higher tension for heavyduty loads. Charge before use: For uninterrupted outdoor work, charge the battery fully for 90 minutes to obtain the specified run time and strap count per charge. What this product solves Reduces manual effort and time compared with manual tensioning and sealing methods. Provides consistent, reliable welds and cutoffs to improve packing speed and uniformity. Offers cordless convenience for outdoor, warehouse, and onsite tasks where mains power is not available. Specifications summary Strap type: PP and PE Strap width: 11 to 16 mm (0.43 to 0.63 inch) Strap thickness: 0.4 to 1.2 mm (0.01 to 0.04 inch) Adjustable pulling force: 900 to 3200 N Battery: 4000 mAh rechargeable lithium, up to 2000 charge cycles Charge time: 90 minutes Runtime per full charge: about 2 hours Straps per charge: approximately 250 to 350 Weight with battery: 6.6 lbs This handheld electric strapping tool combines automation, adjustable tension, and cordless convenience to streamline packaging tasks across timber, pallet, and construction applications.