Series: Mini SAS Wire Size: 30AWG, tinned copper, OD: 0.9x2.3mm Latch to Mate: With latch Plating: Au 30u' min over Ni 100u' min Cable: Horizontal flame, PCB 94V-0, PBT 94V-0 Applications: Data or Communication (Redundant Array of Disks) Workstations Rackmount Server Servers Storage Racks Transfer rate 12gbps. Specification meets SAS 4.0. Mechanical Performance mating and separation Condition: EIA 364-13. Insert and pull out at a speed of 25 mm or minute. mating: 55 N maximum for Mini SAS. Separation: 49 N maximum for Mini SAS. mating: 45 N maximum for SATA connector. Separation: 10 N maximum for SATA connector. Electrical Performance: Contact Current Rating - 0.5 amps maximum per pin when mated. Voltage Rating - 30vac for contact when mated or unmated. Contact Resistance - 30mohm Max. Initial, 15mohm maximum after stress test. Dielectric Withstanding Voltage - 500 vac for 1 minute without break. Insulation Resistance - 1000 mohm minimum. Signal Integrity: Mated Contact Impedance: 100 ohms 15 percent Absolute Cable Impedance: 100 ohms 10 percent Pair Cable Matching: 5 ohms Common Mode Impedance: 25 to 40 ohms Insertion Loss: -6 DB maximum up to 4.5 GHz Crosstalk: -26 DB up to 6 GHz Color: As shown Material: Plastic and braided wire Cable Length: 0.5m Package Contents: 1 x Mini Sas Sff-8087 to 4 Sff-8482 Cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3 cm.