Car UPA USB Programmer Tool V1.3 with Adapter for 2014 Version MA Diagnostic Use

249,00 RON
Livrare GRATUITĂ

Car UPA USB Programmer Tool V1.3 with Adapter for 2014 Version MA Diagnostic Use

  • Marcă: Unbranded
Vândut de:

Car UPA USB Programmer Tool V1.3 with Adapter for 2014 Version MA Diagnostic Use

  • Marcă: Unbranded

249,00 RON

În stoc
Livrare GRATUITĂ
Vândut de:

249,00 RON

În stoc
Livrare GRATUITĂ

Acceptăm următoarele metode de plată

Descriere

Car UPA USB Programmer Tool V1.3 with Adapter for 2014 Version MA Diagnostic Use

Simply connect the motherboard of the UPA programmer directly or using a DB9 male or female extension cable (1: 1) Insert the correct configuration key into the slot on the main board and start programming via ZIF or DIP female ! You can also use the included DIL to 10 flat ribbon pins, place it inside the ZIF plug and connect a clip or clamps for the use of ISP from there. For MCU. Choose the adapter you want to use, connect the flat cable for the adapter (PIN1 is always indicated on both the cable and the adapter) and also on the 10-pin ISP connector on the main board. Select the VCC supply source via on the main board next to the ISP connector (on = target upa supply ... off = target has its own supply). Slide the adapter over the soldered PLCC MCU on the target PCB. (No welding, no pinout revision, no pin counting, saves a lot of time and problems and allows your work to be faster, more accurate and easier). Once your workshop is equipped with our set of adapters, you have a new UPA experience. 1. Language: English. 2. Hardware Version: V2014 3. Software Vesion: V1.3 4. Support Function, but Has No Adapter in the Package for : ST62-40 or 45 or 49 NSC:CR16-HCS5(9) or MCS5(9) or MES5(9) or MFS5(9) or MCT5(9) or HCT5(9) for : PIC12F-508 or 509 or 629 or 675,PIC16F-627(A) or 628(A) or 648A or 72 or 73 or 74 or 76 or 77 or 818 or 819 or 83 or 84(A) or 870 or 871 or 872 or 873(A) or 874(A) or 876(A) or 877(A) for : MC68HC05-B6 or B8 or B16 or B16 or B32 or E6 or E6 or H12 or L28 or P3 or P3x or X16 or X32 MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A, MC68HC11 or A1 or A8 or E9 or EA9, MC68HC11-E20 or F1 or K4 or KA2 or KA4 or KG4 or KS2 or KS8 or L6 or P2 or PA8 or PH8 MC68HC912-B32 or BE32 or D60 or D60A or DC128A or DG128 or DG128A, MC9S12-D64 or A128 or DG128 or DG256 or H128 or H256 for 8051 Architecture: AT89S-51 or 52 or 53 or 8252 or 8253 Colour:As Shown Material:plastic Package Contents: 1 x UPA programmer 1 x UPA-USB cable 1 x Mainboard with 40pin DIL ZIF (600mil) socket and 14pin SOIC ZIF (150mil) socket 1 x CD Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.
  • ID Fruugo: 413305273-873442274
  • EAN: 9643901768757

Livrări şi Returnări

Expediat în 2 zile

  • STANDARD: GRATUIT - Livrare între lun. 22 decembrie 2025–lun. 29 decembrie 2025 - GRATUIT

Livrare de la China.

Facem tot ce ne stă în putinţă să ne asigurăm că produsele comandate de dumneavoastră vă sunt livrate în întregime şi conform specificaţiilor. Cu toate acestea, dacă primiţi o comandă incompletă sau articole diferite de cele comandate, sau aveţi alt motiv pentru care nu sunteţi mulţumit de comandă, puteţi returna comanda sau orice produse incluse în comandă şi primiţi o rambursare completă pentru articole. Vizualizaţi întreaga politică de returnare

Detalii de conformitate a produsului

Vă rugăm să consultați informațiile de conformitate specifice acestui produs prezentate mai jos.

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Producător:
În continuare se prezintă informațiile de contact ale producătorului produsului relevant vândut pe Fruugo.

  • Hefei Yingaonan Trading Co., Ltd.
  • Hefei Yingaonan Trading Co., Ltd.
  • Room 503, Building 1, Jiaxing Garden, No. 9 Jiashan Road, Jiashan Road Sub-district, Yaohai District, Hefei City, Anhui Province
  • Hefei
  • CN
  • 230011
  • ashburbu@163.com
  • 19162050305

Persoana responsabilă în UE:
În continuare se prezintă informațiile de contact ale persoanei responsabile din UE. Persoana responsabilă este operatorul economic desemnat, cu sediul în UE, care este responsabil pentru obligațiile de conformitate referitoare la produsul relevant vândut în Uniunea Europeană.

  • In Memoria Futuri SAS
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE
  • Paris
  • France
  • 75004
  • infoapexchen@gmail.com
  • 33745713901