Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

674,00 RON
+ 37,49 RON Livrare

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

  • Marcă: Unbranded
Vândut de:

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L ) 26s

  • Marcă: Unbranded

674,00 RON

Economii 675,00 RON (50%)

Preț recomandat

1.349,00 RON
În stoc
+ 37,49 RON Livrare
Vândut de:

674,00 RON

Economii 675,00 RON (50%)

Preț recomandat

1.349,00 RON
În stoc
+ 37,49 RON Livrare

Acceptăm următoarele metode de plată

Descriere

Condition: 100% Brand New <br>Item Type: Cylinder <br>Material: Aluminum Alloy <br>Color: As Pictures Shown <br>Optional Type: ACK63-90R, ACK63-90L <br> <br>Inner Diameter: Approx. 63mm / 2.5in <br>Piston Rod Outer Diameter: Approx. 20mm / 0.8in <br>Action Type: Double Action <br>Working Medium: Air (filtered by a Filter Screen Above 40μm) <br>Operating Pressure Range: Approx. 0.15-1.0MPa (22-145psi) <br>Guaranteed Pressure Resistance: 1.5MPa (215psi) <br>Working Temperature (℃): -20-80 <br>Operating Speed Range: Approx. 50-200mm/s 2-7.9in/s <br>Travel Tolerance Range: 1.0 <br>Rotation Angle Tolerance Range: Approx. ±1.5° <br>Buffer Type: None <br>Take over Caliber: PT1/8 <br>Installation and Use <br>1. When the cylinder clamps the workpiece, it must be performed within the clamping stroke, and the clamping operation cannot be performed within the rotation stroke. <br>2. The clamping plane must be perpendicular to the cylinder axis. After the workpiece is clamped, please do not move the workpiece. <br>3. Before piping the cylinder, the debris in the pipe must be removed to prevent debris from entering the cylinder. <br>4. The medium used in the cylinder should be filtered by a filter element above 40μm before use. <br>5. When the cylinder is removed and not used for a long time, pay attention to rust prevention on the surface, add dust blocking caps to the intake and exhaust ports, and apply rust prevention oil to the end of the piston rod.<br>1、This is a double?acting rotary clamping corner press cylinder with an inner diameter of 63mm and the maximum working pressure reaches 1.0MPa the maximum operating speed can reach 200mm/s. <br>2、The cylinder block is made of aluminum alloy, with high density and high strength, supporting long time and high load work. <br>3、The inner wall of the cylinder mirror process, the surface is hard oxidized to extend the service life of the cylinder. <br>4、The hard protective layer is resistant to wear and corrosion and can be used in harsh working environments. <br>5、The cylinder is small in size and has simple structrue, you can carry it easily and install it in a few minutes.1 x Cylinder Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
  • ID Fruugo: 428219790-899763782
  • EAN: 6471506039599

Informații privind siguranța produsului

Vă rugăm să consultați informațiile despre siguranța produsului specifice acestui produs prezentate mai jos

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Etichete de siguranță pentru produse

CE Mark
Avertismente de siguranță: Not suitable for children under 36 months
Ingrediente: Others

Livrări şi Returnări

Expediat în 24 de ore

  • STANDARD: 37,49 RON - Livrare între lun. 10 noiembrie 2025–mar. 18 noiembrie 2025

Livrare de la China.

Facem tot ce ne stă în putinţă să ne asigurăm că produsele comandate de dumneavoastră vă sunt livrate în întregime şi conform specificaţiilor. Cu toate acestea, dacă primiţi o comandă incompletă sau articole diferite de cele comandate, sau aveţi alt motiv pentru care nu sunteţi mulţumit de comandă, puteţi returna comanda sau orice produse incluse în comandă şi primiţi o rambursare completă pentru articole. Vizualizaţi întreaga politică de returnare

Detalii de conformitate a produsului

Vă rugăm să consultați informațiile de conformitate specifice acestui produs prezentate mai jos.

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Producător:
În continuare se prezintă informațiile de contact ale producătorului produsului relevant vândut pe Fruugo.

  • Luminary Lane
  • Dongguan Zuiyu Electronic Technology Co., Ltd.
  • Room 401, No. 19, Dongxiang, Yanggonglang, Qiaotou Town, Dongguan City, Guangdong Province
  • Dongguan
  • CN
  • 523520
  • simona14@163.com
  • 17512067209

Persoana responsabilă în UE:
În continuare se prezintă informațiile de contact ale persoanei responsabile din UE. Persoana responsabilă este operatorul economic desemnat, cu sediul în UE, care este responsabil pentru obligațiile de conformitate referitoare la produsul relevant vândut în Uniunea Europeană.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • FR
  • 75004
  • infoapexchen@gmail.com
  • 33 745713901