Description Features:100% brand new and high quality.Improving Work Efficiency: The wire twisting tool can twist and stripe wire simultaneously, it can help increase productivity and prevent sore fingers and cramping hands. NOTE: Always Turn off breakers before working on electrical systemsEasy Operation: The wire connector tool with 3/8 hex shank can be attached to impact driver and power drill for easy operation, helps alleviate repetitive motion injuriesHigh Quality: Made from high quality 45 precision steel for good performance and high-precision qualityThe wire connector tool can not only be used with power drill, but can use manually. Two screwdriver bits included for manual twisting and stripping wireSpecifications:Item type: Wire StripperMaterial:45 precision steelColor:SliverWeight:(About)145gInstructions:Electric parallel1. Prepare the hand drill and attach the liner to the hand drill2. Insert the three strands of the parallel thread separately, fix the tail end with a vise, and fit the threader and the vise as much as possible, and the three wires must be clamped. If not clamped, it will affect the joining effect.3. Start the electric drill to start the electric drill, and slowly rotate the aligner. During the rotation, the aligner should be pressed firmly in the direction of the vise. When the winding is completed, the aligner can be loosened and the thread is removed. lineManually parallel:1. Measure the length of the strip to be stripped2. Place a good amount of wire into the corresponding hole and clamp it with a vise3. Press the parallelizer in the direction of the arrow to rotate and parallel4. Parallel completionTips:1. Pliers clamp the wires, the wires need to be parallel to one row, and clamped with force2. The pliers are in close contact with the parallelizerPackage Included:1 PC *Wire StripperNote:1. Due to the light and screen difference, the item 039;s color may be slightly different from the pictures.2. Please allow 0.5-2 cm differences due to manual measurement.