Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90R )

524,00 RON
Livrare GRATUITĂ

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90R )

  • Marcă: Unbranded
Vândut de:

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90R )

  • Marcă: Unbranded

524,00 RON

Economii 175,00 RON (25%)

Preț recomandat

699,00 RON
În stoc
Livrare GRATUITĂ
Vândut de:

524,00 RON

Economii 175,00 RON (25%)

Preț recomandat

699,00 RON
În stoc
Livrare GRATUITĂ

Acceptăm următoarele metode de plată

Descriere

Feature:1. This is a doubleacting rotary clamping corner press cylinder with an inner diameter of 63mm and the maximum working pressure reaches 1.0MPa the maximum operating speed can reach 200mm/s.2. The cylinder block is made of aluminum alloy, with high density and high strength, supporting long time and high load work.3. The inner wall of the cylinder mirror process, the surface is hard oxidized to extend the service life of the cylinder.4. The hard protective layer is resistant to wear and corrosion and can be used in harsh working environments.5. The cylinder is small in size and has simple structrue, you can carry it easily and install it in a few minutes.Specification:Condition: 100% Brand New Item Type: CylinderMaterial: Aluminum AlloyColor: As Pictures ShownOptional Type: ACK63-90R, ACK63-90L Inner Diameter: Approx. 63mm / 2.5inPiston Rod Outer Diameter: Approx. 20mm / 0.8inAction Type: Double ActionWorking Medium: Air (filtered by a Filter Screen Above 40m)Operating Pressure Range: Approx. 0.15-1.0MPa (22-145psi)Guaranteed Pressure Resistance: 1.5MPa (215psi)Working Temperature (): -20-80Operating Speed Range: Approx. 50-200mm/s 2-7.9in/sTravel Tolerance Range: 1.0Rotation Angle Tolerance Range: Approx. 1.5Buffer Type: NoneTake over Caliber: PT1/8Installation and Use1. When the cylinder clamps the workpiece, it must be performed within the clamping stroke, and the clamping operation cannot be performed within the rotation stroke.2. The clamping plane must be perpendicular to the cylinder axis. After the workpiece is clamped, please do not move the workpiece.3. Before piping the cylinder, the debris in the pipe must be removed to prevent debris from entering the cylinder.4. The medium used in the cylinder should be filtered by a filter element above 40m before use.5. When the cylinder is removed and not used for a long time, pay attention to rust prevention on the surface, add dust blocking caps to the intake and exhaust ports, and apply rust prevention oil to the end of the piston rod..Package List:1 x Cylinder
  • ID Fruugo: 426857360-896044216
  • EAN: 7708428301527

Informații privind siguranța produsului

Vă rugăm să consultați informațiile despre siguranța produsului specifice acestui produs prezentate mai jos

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Etichete de siguranță pentru produse

CE Mark
Avertismente de siguranță: Warning: Please read the product instructions carefully before use to ensure correct use.
Număr de serie: 7708428301527

Livrări şi Returnări

Expediat în 2 zile

  • STANDARD: GRATUIT - Livrare între mie. 05 noiembrie 2025–mie. 12 noiembrie 2025 - GRATUIT

Livrare de la China.

Facem tot ce ne stă în putinţă să ne asigurăm că produsele comandate de dumneavoastră vă sunt livrate în întregime şi conform specificaţiilor. Cu toate acestea, dacă primiţi o comandă incompletă sau articole diferite de cele comandate, sau aveţi alt motiv pentru care nu sunteţi mulţumit de comandă, puteţi returna comanda sau orice produse incluse în comandă şi primiţi o rambursare completă pentru articole. Vizualizaţi întreaga politică de returnare