This switch is the perfect solution for setting turn signals on early street pole projects. Simply clamp the steering column without drilling or cutting! Die casting and chrome plating. It is a 7-wire design that includes a wiring diagram. These apply to many early street poles. Installation Notes: 1. Insert the clip into the narrow space between the signal switch housing and the strap support. 2. Wrap the clamp around the desired position on the steering column. 3. Engage the ends of the clip and tighten the screws until the switch is securely held correct. 4. Scratch a small piece of paint from the steering column to a good grounding The clamp is in a position that allows metal contact. Switch type: turn signal switch Equipment: Universal for , , and other vehicles Exchange part number: P111-HL101-2PIN Voltage: 12V replacement: HL101 Cable length: 60cm / 23.4 inches For Universal , , and other vehicles. Colour: silver Material: metal + plastic Package Contents: 1 * Turn Signal Switch Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.