Database. Input Voltage Range: 6.8~30V (2~6S LiPo). 1x ESC Power Pad. Battery Divider 1K:20K (Scale 2100 in INAV, 1K:20K in ArduPilot BATT_VOLT_MULT 21.0). Current Sensor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot). Sense Resistor: 90A Continuous, 220A Peak BEC 5V Output. Designed for Flight Controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS Module, AirSpeed. Continuous Current: 2 Amps, 3A Max. BEC 9V /12V Output Designed for Video mitter, Camera, Gimbal, etc. Continuous Current: 2 Amps, 3A Max. 12V Option with Jumper Pad. For regulated 9V/12V output, input voltage should be Greater than output voltage + 1V. BEC Vx Output Designed for servos. Voltage adjustable, 5V default, 6V or 7.2V via jumper. Continuous Current: 8 Amps, 10A Max. For regulated Vx output, input voltage should be Greater than Vx voltage + 1V. BEC 3.3V Output. Designed for Baro / Compass modules and external 3.3V peripherals. Linear Regulator Continuous Current: 200mA Fiber Channel Specifications MCU: STM32H743VIH6, 480MHz, 512KB RAM, 2MB Flash IMU: ICM42688-P Barometric Pressure: DPS310 (I2C2) Display: AT7456E Black Box: MicroSD Card Slot (SDIO) 7x Uarts (1,2,3,4,6,7,8), built-in inversion. 13x PWM outputs (12+LED) 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2) 3x LEDs for FC STATUS (blue, red) and 3.3V indicator (red) 2x I2C 1x CAN USB/Buzzer Extender, Type-C (USB2.0) Dual Camera Input 9V(12V) for VTX Power High Accuracy Current Sense, 220A Range ADC VB2 Divider: 1K:20K ADC AirSpeed Divider: 20K:20K FC Firmware INAV: MATEKH743 ArduPilot: MATEKH743 Color: blue Material: ABS Package Contents: 1 set of circuit boards Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in th