K7C product features: 1,The two versions of K7C 150W and 110W are quite different, please read this paragraph before ordering to decide which version to buy. 150W has higher power and higher brightne, but we only recommend using it in projector headlights; 110W adopts the design of K5C 110W version, which optimizes the driving scheme and heat diipation system. One model is the exception, this difference has no effect on the H4 model, both the 150W and 110W H4 models are suitable for use with reflectors. 2,There is no obvious difference between K7C 110W brightne and K5C 110W brightne, and K7C performs better in some projectors. Since the K7C has an extra copper tube and an upgraded cooling fan, the operating temperature will be reduced by about 8C-10C. The H7, H11, 9005, 9006, and 9012 models of K7C add a temperature sensor at the chip position, which has a positive effect on protecting the chip from overheating. Please note that there is no temperature sensor near the H1 and H4 chips, we have protected them in other ways, and reduce the power of H1 and H4 by 5W per bulb compared to other models. 3,Some Korean brand cars are not suitable for using bulbs with too high power, please consult us before ordering. Special reminder. 1. Some vehicles need to install a decoder after using LED, otherwise the following situations will occur: One of the two light bulbs is off or flickering. A fault light appears on the instrument panel. after the low beam is turned on, one of the bulbs turns on the high beam function uncontrollably. These situations indicate that you need to modify the decoder. 2. Adding LED bulbs is a kind of modification, which is not applicable to all cars. Some models require the front bumper to be removed to install the LEDs, and some installation fees may apply. We will not bear any installation costs. Please try to light up the LED and test before installation to make sure there is nothing abnormal before removing the front bumper to avoid unneceary costs. 3. LED has temperature adjustment function. As the temperature of the bulb increases, the power will drop to a certain extent. This is normal and will help the lamp last longer. The power provided in the data is laboratory data and does not represent the power after long-term operation. 4. This product is not suitable for fog lights, deposits will reduce the life of the cooling system, if you need to use it in fog lights, please contact the staff, we will recommend a more suitable bulb for you. 5. The 4300K LED that comes with this product is not the same color as the 4300K Halogen. 4300K LEDs are yellowish, 4300K halogens are reddish, they have different color coordinates. If you are looking for the same color as the halogen lamp, please buy the halogen lamp directly. 6. Additional adapters are required for some vehicles to install H1/H7, if you are not sure whether your vehicle needs an adapter, please contact our staff. Orders from this link do not include additional adapters Operating voltage: DC 9-12V Chip:150W=7035 LED Chip110W=K-XP LED Chip Operating temperature: -40degC ~ +80degC Colour temperature: 6000K/4300K Chip power: 110W/Pair,150W/PairH1 and H4 models will be 10W/Pair lower than other models Design. All-in-one design with cooling fan With canbus function System life. >50,000 hours Design. All-in-one design with cooling fan Heat diipation principle: aircraft aluminium 6063 Actual power is 90% of theoretical power. Car suitable models. 90% of car models on the market Product includes A pair of LED bulbs One English manual Product guarantee. 100% brand new products 100% original production Supplied with 1 year original manufacturer's warranty FAQ: Do not know the Interface model of your car headlight ? 1, View the instructions of your car headlight. 2, ask the Car manufacturers which you bought your car from for help. About the canbus decoder: After installing the LED bulb, one of the following conditions appears for the headlights. Please don't worry, there is no problem with the light bulb, just your car needs to install an additional decoder: 1. One bulb flickers or one bulb does not light. 2. The dashboard shows the headlight failure. 3. After replacing the H4 headlight bulb, turn on the high beam light, but light the low beam light. Please contact our customer service and we will help About the adapter The lamp holders of some cars are not standard designs, and additional lamp holders are needed to complete the installation of the LED bulbs. If you are not sure whether you need an adapter, please contact our customer service and attach a photo of the lamp holder structure. We will provide aist (H7/H1) About Shipping: Generally , we will ship your order in 1-5 working days. If ship from China , it's about 10-60 days (Most countries on