DC 5/6/9/12V Motor Reverse Polarity Module Time Adjustable Delay Relay 2A Drive Current

74,00 RON
Livrare GRATUITĂ

DC 5/6/9/12V Motor Reverse Polarity Module Time Adjustable Delay Relay 2A Drive Current

  • Marcă: Unbranded
Vândut de:

DC 5/6/9/12V Motor Reverse Polarity Module Time Adjustable Delay Relay 2A Drive Current

  • Marcă: Unbranded
Preţul de vânzare recomandat: 149,00 RON
Preţ: 74,00 RON
Economisiţi: 75,00 RON (50%)
Vândut de:
74,00 RON
Livrare GRATUITĂ

În stoc

Acceptăm următoarele metode de plată

Descriere

Features Specification Description: Operating current: 5V, forward 4mA, reverse: 36mA; 12V, forward 6mA, reverse: 44mA Load current: Max 2A Forward max time: 5000 seconds, 0.1 seconds step Reverse max time: 5000 seconds, 0.1 seconds step Size: 54*22*15mm / 2.12*0.87*0.59in Weight: Approx. 15g How to use: VIN connected to the positive of power supply , GND connected to the negative of power supply; P+ connected to the positive of motor power supply, P- connected to the negative of motor power supply; M + & M- connected to both ends of the motor After power, D1 flashes for 3 times, D2 off, M+ output positive, M- output negative, motor forward; After a time delay T1, D2 on, M+ output negative, M- output positive, motor reversal; After a time delay T2, D2 off, M+ output positive, M- output negative, motor forward; And so on. T1: motor forward delay time, default 0.1-5000 seconds adjustable (step 0.1 seconds) T2: motor reverse delay time, default 0.1-5000 seconds adjustable (step 0.1 seconds) By "Time multiple selection" setting, the maximum delay is up to 40,000 seconds How to Set Up: After power on, D1 3 blinks, enter the "work mode" D2 on Reversal, D2 off Forward Press and hold the key for 2 seconds, D1 on, enter the "setup mode" D2 off, It's forward "setup mode" In forward "setup mode", continuously trigger KEY twice, D1 off, enter "Standby timer mode" In the "Standby timer mode" , trigger KEY to start timing(enter "Timing Mode") D1 flashing means it is timing("Timing Mode") Trigger KEY again to stop the clock(exit "Timing Mode") D1 flashing time is forward time(T1) Press and hold the Key for 2 seconds, D2 on, enter the Reverse "setup mode" In Reverse "setup mode", continuously trigger key twice, D1 off, enter "Standby timer mode" In the "Standby timer mode", trigger KEY start timing(enter "Timing Mode") D1 flashing means it is timing("Timing Mode") Trigger KEY again to stop the clock(exit "Timing Mode") D1 flashing time is Reverse time(T2) So far, forward time(T1) and reverse time(T2) is set up Re-power in "work mode" Note: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Package List
  • ID Fruugo: 271638542-602150708
  • EAN: 9308869142574

Informații privind siguranța produsului

Vă rugăm să consultați informațiile despre siguranța produsului specifice acestui produs prezentate mai jos

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Etichete de siguranță pentru produse

CE Mark
Avertismente de siguranță: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.

Livrări şi Returnări

Expediat în 2 zile

  • STANDARD: GRATUIT - Livrare între vin. 24 octombrie 2025–joi 30 octombrie 2025 - GRATUIT

Livrare de la China.

Facem tot ce ne stă în putinţă să ne asigurăm că produsele comandate de dumneavoastră vă sunt livrate în întregime şi conform specificaţiilor. Cu toate acestea, dacă primiţi o comandă incompletă sau articole diferite de cele comandate, sau aveţi alt motiv pentru care nu sunteţi mulţumit de comandă, puteţi returna comanda sau orice produse incluse în comandă şi primiţi o rambursare completă pentru articole. Vizualizaţi întreaga politică de returnare