DC6-12V High Voltage Pulse Generator Inverter Super Arc Pulse Ignition Module (901-2)

69,00 RON
Livrare GRATUITĂ

DC6-12V High Voltage Pulse Generator Inverter Super Arc Pulse Ignition Module (901-2)

  • Marcă: Unbranded

DC6-12V High Voltage Pulse Generator Inverter Super Arc Pulse Ignition Module (901-2)

  • Marcă: Unbranded
Preţul de vânzare recomandat: 89,00 RON
Preţ: 69,00 RON
Economisiţi: 20,00 RON (22%)
Vândut de:
69,00 RON
Livrare GRATUITĂ

În stoc

Acceptăm următoarele metode de plată

Descriere

Features:It can be used as high voltage source for high school science experiment, electronic instrument, negative ion generator and little science.After the input of dc 6-12V voltage, a dc high voltage of about 10,000V (about 1-2 cm of arc) can be obtained at the output end.It can generate high temperature and high frequency arc, can easily ignite combustible.According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency.The peripheral circuit is simple (simply connect the switch, Install the battery), the discharge strength is violent.Specification:Model(Optional): 901-2(work continuously for 10s), 901-c2(work continuously for 1 min)(Note: it is strictly forbidden to exceed working time)Input voltage: DC6-12VInput current: 1A-3A (related to voltage)High pressure type: pulse high and low pressure integrated typeOutput voltage: approx.0.5-1 million V(please pay attention to safety when using)Discharge distance between high pressure poles: 10-20mmOutput high-voltage wire length: approx.100mmInput power wire length: approx. 100mm (the red wire is positive)Size:86*25mm/3.4*1inWeight: Approx.63g~72g/2.2oz~2.5ozNote:1.Avoid high-voltage no-load power supply. (it is necessary to adjust the appropriate distance of the high-voltage cable end before energizing. The distance of the high-voltage cable to pull the arc is directly proportional to the voltage and capacity of the battery used. When measuring arc distance, the test shall be conducted from short to long. 2.Power is strictly forbidden when exceeding the maximum arc distance. As the high voltage energy cannot be released, modules are easily damaged.3.About the input power: 2pcs3.7-v lithium battery can be used in series, such as 18650 battery, idle cell phone battery (to remove the protection board, recommended capacity above 2000mAh) or Nickel-cadmium/Ni-mh battery pack, or 6V lead Acid batteries.4.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..
  • ID Fruugo: 416673585-879148826
  • EAN: 7540131772580

Informații privind siguranța produsului

Vă rugăm să consultați informațiile despre siguranța produsului specifice acestui produs prezentate mai jos

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Etichete de siguranță pentru produse

CE Mark
Avertismente de siguranță: Warning: Please read the product instructions carefully before use to ensure correct use.
Număr de serie: 7540131772580

Livrări şi Returnări

Expediat în 2 zile

  • STANDARD: GRATUIT - Livrare între lun. 06 octombrie 2025–lun. 13 octombrie 2025 - GRATUIT

Livrare de la China.

Facem tot ce ne stă în putinţă să ne asigurăm că produsele comandate de dumneavoastră vă sunt livrate în întregime şi conform specificaţiilor. Cu toate acestea, dacă primiţi o comandă incompletă sau articole diferite de cele comandate, sau aveţi alt motiv pentru care nu sunteţi mulţumit de comandă, puteţi returna comanda sau orice produse incluse în comandă şi primiţi o rambursare completă pentru articole. Vizualizaţi întreaga politică de returnare

Detalii de conformitate a produsului

Vă rugăm să consultați informațiile de conformitate specifice acestui produs prezentate mai jos.

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Producător:
În continuare se prezintă informațiile de contact ale producătorului produsului relevant vândut pe Fruugo.

  • Wuhan Pinsheng Technology Co., Ltd.
  • Wuhan Pinsheng Technology Co., Ltd.
  • No.A357,Shoulder-to-shoulder?Incubator,Building?4
  • Wuchang District
  • Wuhan
  • CN
  • 430000
  • pinsenkj@163.com
  • 18062524796
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Persoana responsabilă în UE:
În continuare se prezintă informațiile de contact ale persoanei responsabile din UE. Persoana responsabilă este operatorul economic desemnat, cu sediul în UE, care este responsabil pentru obligațiile de conformitate referitoare la produsul relevant vândut în Uniunea Europeană.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795