Description: Function:OBD2 Box is auto tool for diagnosing link connectors, easy access to OBDII connectors, convenient of power and ground signals. Once an unacknowledged is detected, it can also be connected to a multimeter or oscilloscope for further testing. 16 Pin:Each of the 16 pins can be easily accessed when the scan tool communicates with the vehicle. Uses banana jacks that accept all types of 4mm banana plug, including those with boots. LED Indication:OBDII Protocol Detector LEDs provide a quick indication of power or ground issues with the OBDII connector. LED Indications Yellow LEDs (pins 2/6/7/10/14/15) illuminate to indicate communication authentication with the scan tool and protocol. Green LED (pin 4/5), lights up to show ground is good ,Red LED (pin 16), lights up to indicate power. Note:OBD2 Protocol Detector is designed for use by automotive professionals. The vehicle data bus can be easily accessed. Improper use may cause damage to the vehicle data communication system and related circuits and systems. Do not connect jumper pins together without knowing the circuit. Do not use this tool to power loads over 1 amp. Do not place a jumper between power pin 16 and ground pins 4,5. When the display is enabled, the yellow LED will blink when there is a change on the corresponding data line A blinking LED will allow you to determine activity on that line ,The green and red LEDs corresponding to pins 4, 5 and 16 of the OBDII connector are active. High Quality:CAN Box is made of high quality ABS plastic material,which are not easy to damage.Professional manufacturing with stable performance for long time use. Specification: 18cmx8cmx3.5cm Cable Length:90cm Package Includes: 1 Box Note: Please allow slightly errors due to manual measurement and different monitors. _x000D_