For Xiaomi Mi Watch S3 Compatible LCD Screen with Digitizer Full Assembly About the product 1. Replacement LCD screen and touch screen digitizer assembly for Xiaomi Mi Watch S3 2. Replace your broken or non-functional screen with a new one 3. Restore your device to a like-new appearance 4. Designed to fit and function properly 5. Each unit is tested and inspected before shipment 6. Professional installation is strongly recommended. No responsibility will be accepted after installation Before Installation Notes Tip 1: Test before installation Do not remove any protective films or labels during testing. Be aware of static electricity. Before beginning any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent damage to internal electronic components. Wear eye protection and handle glass components carefully to avoid injury. Tip 2: Perform a test fit Screen replacements are fragile. Test the screen before full installation. Partially disassemble the device, connect the motherboard to the new LCD or screen using the appropriate cables, power on the device, and verify full functionality. If the screen works correctly, proceed with full installation. If the screen does not display properly, contact the seller immediately. Do not force installation. No responsibility is assumed after installation. Tip 3: Avoid excessive cable bending Do not bend the LCD cable beyond 90 degrees. Excessive bending may result in display failure or black screen.