Handheld automatic strapping machine that welds and cuts PP and PE straps for fast, consistent bundling. The tool tightens, welds, and trims straps automatically after the operator inserts the strap and presses the controls, greatly reducing manual effort and cycle time. Key benefits Automatic melting weld and cut: insert the strap, press the tension button to tighten, then press the welding switch. The tool automatically welds and trims excess strap for a secure joint. automation, easy to use: designed so non professionals can achieve consistent results. Large tightening force handles heavy duty packaging while the total weight with battery is only 6.6 lbs, making it easy to operate for extended periods. Adjustable tension for different loads: a manual knob sets pulling force from 900 to 3200 N to match strap and load requirements. Portable and rechargeable: built in 4000 mAh lithium battery, 90 minute charge time, approximately 2 hours of operation per charge. Typical output per full charge is about 250 to 350 straps. Battery life supports up to 2000 recharge cycles. Key specifications Strap compatibility: PP and PE straps, 11 to 16 mm wide, 0.4 to 1.2 mm thick. Pulling force range: 900 to 3200 N, adjustable via knob. Battery: 4000 mAh rechargeable lithium battery; charge time 90 minutes; run time about 2 hours per charge; approximately 250 to 350 straps per charge; battery service life up to 2000 charge cycles. Weight: approximately 6.6 lbs including battery. Operation: automatic tension, welding, and cutting in one cycle. Typical bundle cycle for timber can be completed in under 1 minute. Typical applications Timber bundling: secure bundles of lumber or boards quickly on site or in the yard, with cycle time under 1 minute per bundle. Warehouse and palletizing: fast strapping of stacked boxes and pallet loads to speed packing and dispatch operations. Construction materials and metal handling: bundle rebar, pipes, or similar heavy items using higher tension settings for reliable containment. How it improves workflow Reduces manual labor by automating tensioning, welding, and cutting. Delivers repeatable strap tension and weld quality to reduce rework. Lightweight and cordless design lets operators work at multiple locations without relocating power sources. Basic operating steps 1. Insert strap into the machine. 2. Press the tension button to tighten to the desired force. 3. Press the welding switch to activate automatic weld and cut. 4. Remove package; the strap is welded and trimmed. This handheld electric strapping machine combines portability, adjustable power, and automatic welding to simplify PP and PE strap packaging across timber, warehouse, and construction workflows.