For DJI Mavic Air 2 / 2S / Mavic 3 Parachute

824,00 RON
Livrare GRATUITĂ

For DJI Mavic Air 2 / 2S / Mavic 3 Parachute

  • Marcă: Unbranded
Vândut de:

For DJI Mavic Air 2 / 2S / Mavic 3 Parachute

  • Marcă: Unbranded

824,00 RON

În stoc
Livrare GRATUITĂ

Politica de retur pe 14 zile

Vândut de:

824,00 RON

În stoc
Livrare GRATUITĂ

Politica de retur pe 14 zile

Metode de plată:

Descriere

For DJI Mavic Air 2 / 2S / Mavic 3 Parachute

1. Intelligent safety parachute, high-speed rescue, buzzer warning and positioning 2. Manti 3Manti 3 Plus has a built-in electronic flight recorder, which can record UAV flight and performance parameters. The information recorded by the recorder can be used for UAV flight accident analysis, reproduce the accident process, and analyze the cause of the accident concretely ( Built-in 150mAh battery, 4 hours working time, 1GB data storage) 3. Dual sensor data fusion: horizontal and vertical activation, effectively avoiding propeller entanglement, and reducing the additional risk of bombing caused by rescue triggers 4. The flight attitude can accurately identify the danger and omnidirectional perception, and can respond to the dangerous situation in the fastest 0.5 seconds, so as to judge the opening of the parachute, it needs to cooperate with the inner eight to stop the propeller, so that the machine can make a safe landing 5. To upgrade the DFU firmware, you need to download the desktop version of the Firefly software, and you can manually select the model to match the firmware 6. There is a silicone pad design at the bottom of the parachute main unit, which can effectively prevent the drone from being scratched 7. The umbrella cabin of Manti 3Manti 3 Plus is for one-time use. After the parachute is opened, the umbrella cabin needs to be replaced before it can be used. 8. When installing, please be careful not to cover the battery switch and the sensor below Parameter: 1. Speed reduction: 5ms-5.5ms (the difference depends on the size of the drone) 2. Normal working hours: 4 hours 3. Working temperature: -10-60 degrees Celsius 4. Response time: 100 milliseconds 5. Response distance: 8 meters 6. Working altitude: less than or equal to 4000 meters 7. Charging voltage: 5V 1A 8. Equivalent drop distance: 1.6 meters and below 9. Consumable parts: umbrella cabin 10. Buzzer: Yes 11. Firmware upgrade: support (DFU) 12. On-board detection: support (6 meters above the ground to enter the alert mode, only after entering the alert mode can the flight accident be detected and the parachute opened) 13. Main material: PC 14. Net weight: 63.3g (Manti 3), 89.2g (Manti 3 Plus) 15. Dimensions: 5 x 4.5 x 3.7cm (Manti 3), 6 x 6 x 4.2cm (Manti 3 Plus) Applicable models: -Manti 3: Mavic 3AIRAIR 2AIR 2SMavic proMavic 2 -Manti 3 Plus: Mavic 3 Mavic 2Mavic pro
  • ID Fruugo: 449811637-947120621

Informații privind siguranța produsului

Vă rugăm să consultați informațiile despre siguranța produsului specifice acestui produs prezentate mai jos

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Etichete de siguranță pentru produse

CE Mark
Avertismente de siguranță: Check the product before use to ensure safe usage;, keep away from fire, clean thoroughly after contact with liquids to avoid corrosion or rust.
Numărul piesei producătorului: 1920-X
Numărul de model: TBD0603683501
Număr de serie: 1292329323
Numărul lotului: TTX-1

Livrări şi Returnări

Expediat în 24 de ore

  • EXPRESS: GRATUIT - Livrare între lun. 09 februarie 2026–mar. 10 februarie 2026 - GRATUIT

Livrare de la China.

Facem tot ce ne stă în putinţă să ne asigurăm că produsele comandate de dumneavoastră vă sunt livrate în întregime şi conform specificaţiilor. Cu toate acestea, dacă primiţi o comandă incompletă sau articole diferite de cele comandate, sau aveţi alt motiv pentru care nu sunteţi mulţumit de comandă, puteţi returna comanda sau orice produse incluse în comandă şi primiţi o rambursare completă pentru articole. Vizualizaţi întreaga politică de returnare

Detalii de conformitate a produsului

Vă rugăm să consultați informațiile de conformitate specifice acestui produs prezentate mai jos.

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Producător:
În continuare se prezintă informațiile de contact ale producătorului produsului relevant vândut pe Fruugo.

  • PULUZ
  • Shenzhen PULUZ Technology Limited
  • 8/F, No.614 Building, Bagua 1st Road
  • Futian District, Shenzhen, guangdong
  • China
  • Shenzhen
  • CN
  • 518029
  • support@puluz.com
  • +86 755 83035355
  • https://www.puluz.com/

Persoana responsabilă în UE:
În continuare se prezintă informațiile de contact ale persoanei responsabile din UE. Persoana responsabilă este operatorul economic desemnat, cu sediul în UE, care este responsabil pentru obligațiile de conformitate referitoare la produsul relevant vândut în Uniunea Europeană.

  • Yating He
  • E-CrossStu GmbH
  • Mainzer Landstr.69
  • Frankfurt am Main, Hessen,Deutschland
  • Germany
  • Frankfurt am Main
  • DE
  • 60329
  • E-CrossStu@web.de
  • +49 69332967674