Feature: 1. Display Calibration: The back of the signal source voltage generator module has voltage display calibration potentiometers. Large terminals, easy to wire. 2. 0‑10V Output: You can calibrate the display value of present voltage by yourself if the display of signal source voltage generator is accurate. 1 analog output channel, output 0‑10V voltage signal. 3. Back Cover Protection: The signal voltage generator is protected by a back cover, which can effectively resist dusty environment and three display modes can be switched. 4. Overcurrent and Reverse Connection Protection: The generator has overcurrent protection, reverse connection protection, 15-30VDC power supply, and anti reverse connection design. 5. Wide Application: Our signal generator can be used as valve regulation, frequency control, PLC debugging, panel debugging, LED testing, and analog transmitter output. Specification: Item Type: Signal Generator Material: ABS Overview: 0-10V Signal Generator, Large Terminals, Easy To Wire. Sampling Channel: 1 Analog Output Channel, Output 0-10V Voltage Signal. Channel Characteristics: Large Package Power Device, High Reliability, High Accuracy, Strict Thermal Design, Stable Output. Power Supply Protection: 15-30VDC Power Supply, With Anti Reverse Connection Design. Accuracy: Display Accuracy 0.01V. Operation Accuracy 0.01V. Maximum Load Current: 0.2A Human Machine Interface: 4 Digit Digital Tube Display, High Brightness, Three Display Modes Switchable, Voltage Percentage, Hz. Rotation Encoder: 20 Pulses In One Turn, Set Coarse And Fine Tuning Parameters To Adjust Output From 1-50 Turns. Scope Of Application: Widely Used In Modern Industry. Operating Temperature: -10-60℃ Operating Humidity: <80%. Package List: 1 x Signal Voltage Generator