1、The product can output 0-10V voltage 2、Can work independently and can be used with PLC, industrial control board, or various motion control cards, industrial control controllers, which has strong compatibility 3、With fully enclosed enclosure, strong protection 4、Mounting and fixing method according to standard industry 5135 5、The wiring uses 08mm 4-bit terminal blocks, easy to wire and maintain 6、Automatic range intelligent switching display, below 10V, 2 digits after the decimal point, and above 10V, 1 digit after the decimal point 1 x Voltage Signal Generator Item Type: Voltage Signal GeneratorInput Voltage: Default DC15-30VInput Current and Power Consumption: Minimum Standby Current: 40MA / 24VMaximum Allowable Working Current: 200MA / 24VMaximum Allowable Surge Peak Current: 1AAllowable Input Power Ripple: ≤500MVAnalog Signal Output Voltage Accuracy: ± 1%Analog Voltage Output Signal Load Capacity: ≤50MAOutput Short-circuit Protection Allowable Time: ≤ 3 secondsShort Circuit Protection Recovery Method: Automatic recoveryAnalog Signal Output Voltage Ripple: ≤30MVCooling Method: Natural cooling (normal working temperature does not exceed 65 degrees)Use Occasion: Can not be placed next to other heating equipment, to avoid dust, oil mist, corrosive gases, excessive humidity and strong vibration. No flammable gas, conductive dust or liquidWorking Temperature: -15 ~ + 45℃Operating Humidity: 40% ~ 90%Permissible Vibration: Less than 10-55HZ / 0.15MMStorage Temperature: -20 ~ + 65℃Space Interference Radio Waves: No requirements