Feature: 1. EV Fast Charger: This electric car charger has an output of 415V and an input frequency of 50/60Hz. It usually takes about 4 to 5 hours to fully charge an electric car. 2. Safe: All our products are CE and TUV certified. Equipped with intelligent temperature control chip, to avoid the danger of excessive temperature. If the temperature exceeds normal, the output current is lowered or charging is stopped to prevent overheating. 3. Protection: Under voltage protection, overload protection, short circuit protection, ground circuit protection, grounding protection, over temperature protection, low temperature protection, lightning protection. 4. LCD Screen: With approxiamte 2.8 inch/7.1cm large LCD display, all data of your car can be displayed on the charging station when charging. You can see the charging status including current, voltage and temperature. 5. Smart Swing Charging: The charging plug is suitable for Type 2 vehicles and equipped with a card control switch to effectively prevent from charging stealing. 6. Practical: It has a waterproof design, can work normally even on rainy days and can be mounted safely indoors and outdoors, fits for plug in electric vehicles according to IEC 62196‑2 connector standard. Specification: Item Type: EV Charging Wall UnitMaterial : ABS TPU Copper SilverAdjustable Current: 32A (8/10/13/16/32A） Voltage: 415V Power: 22KW Frequency: 50/60Hz RCD (Optional): TypeA RCD User Interface: LED indicator, LCD display (approx. 2.8 inch/7.1cm), card swipingCharging Head Standard: IEC 62196-2Certification: CE,TUV Charging Interface: Type2Cable Length: Approx. 5m/196.9in Charging Plug Waterproof Rate: IP55Charging Station Waterproof Rate: IP65 Operating Temperature: -30℃ to 55℃ Operating Humidity: 5%-95% Features: over voltage protection, under voltage protection, overload protection, leakage protection, ground protection, over temperature protection, lightning protection, short circuit protection. Package List: 1 x Type2 Wall Box Electric Vehicle Charging Station1 x Charging Tip Wall Hook3 x Wall Hook Fixing Screw8 x Expansion Tube Bolts2 x Charging Station Hook Bracket7 x Buckle Bracket Fixing Screw3 x RFID Card1 x Instruction Manual Note: 1. When installing for the first time, be sure to ensure that the power cord takes IN to L (fire wire), IN to N (zero line), PE (ground wire) one after another, and the fire line and the zero line cannot be reversed.2.PE (Earth Wire) must be reliably grounded. Make sure the emergency stop button is activated after power‑up.3. Before charging, ensure that there is no stain or water stain on the end of the charging head;4. It is forbidden to place the charging station in the car during charging.