Please note: There may be slight color difference or discrepancy in the actual product, which does not affect the use, please don't mind, thank you!<br> Operation steps: 1. Turn off the water source, clean the water stains around the leakage point, and use sandpaper to polish the area until it is flat.<br> 2. Install the mold head: Select a 4-point specification mold head and fix it to the hot melt heating plate (screws need to be provided).<br> 3. Heating and welding:<br> • Heat the hot melt to 260 ℃, insert the adhesive rod into the concave mold, and insert the convex mold into the water leakage hole.<br> • After the glue stick melts (about ), quickly inject the melted glue into the hole, cool it down, and trim the excess part<br> • Pressure test: After repair, add water and pressure to observe if there is any leakage.<br> precautions<br> • Safety protection: Wear gloves during operation to avoid ; The glue stick has strong fluidity after melting and requires quick operation.<br> • Avoiding pitfalls guide: Avoid using ordinary glue (such as AB glue) to repair PPR pipes, as they are prone to detachment, When the aperture is too large ( 5mm), it is recommended to replace the pipeline instead of repairing it<br> Color: As Shown<br> Material: Metal<br> Package Contents:<br> 1set * PPR Hot Melt Pipe Repair Tool<br> Only the above package content, other products are not included.<br> Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.