<p>Part Number: 0444</p> <p>Fan switch kit can be used in 12 or 24 volt applications</p> <p>Air Tempreture Application. The Temperature Sensor is placed in the radiator fin section as close to the hot coolant inlet as possible, It senses air temperature as it passes through the radiator and has an adjustable temperature range of 40\u2103 to 110\u2103 (104\u00BAF to 230\u00BAF).</p> <p>Water \/ Coolant Application. The 0444 sensor can also be placed directly into the coolant system and no need to cut hoses. You need to use a Temperature Sensor Adaptor Kit (Part 0409) to assist with this type of fitment. It is recommended to install the sensor in the return hose from the radiator.</p> <p>Relay setup: Dual relay</p> <p>Speed: Single speed, 10 second delay to start up the second fan</p> <p>Applications: Suitable for single and dual fan applications</p> <p>Screen Display: LED digital temp display, actual temp + set temp</p> <p>Temp Display: Centigrade or Fahrenheit</p> <p>Temp settings: 40\u2103 to 110\u2103 (104\u00B0F to 230\u00B0F)</p> <p>Temp setting: Push Button</p> <p>Note: Installation guide not included, we strongly recommend you professional installation.</p> <p>Please check as much as possible to make sure the item is what you need.</p> <p>Color: As Shown</p> <p>Material: plastic</p> <p>Package Contents:</p> <p>1 * Digital Thermatic Fan Switch Kit</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>