Item Type: Ceiling Fan Remote Control Kit Material: Environmentally Friendly ABS Purpose: Ceiling Fan Receiving Control Driver Remote Controller Size: Controller: Approx. 11x5.5x2.6cm / 4.3x2.2x1.0in, Remote Controller: Approx. 12.5x4.5x1.8cm / 4.9x1.8x0.7in Battery Parameters: 2 x AAA Batteries (2 x AAA Alkaline Dry Batteries): Nominal Voltage: 1.5V, Capacity: 900mah Product Specifications: Input Voltage: 110V Maximum Fan Power: 100W Maximum Optical Power: 300W, Compatible With CFL, Incandescent Lamp And LED Wireless Transmission: RF 433 MHz Fan Speed: High, Medium And Low Countdown: 1h, 2h, 4h, 8h Switch Buzzer: Yes The Fan Rotates Backward: No Gross Weight: 300g/10.6oz 1COMPATIBLE RANGE: Ceiling fan remote works well with most ceiling fans, and is compatible with for Hunter, for Harbor Breeze and other well known brands of ceiling fans. Compatible with CFL, incandescent lamp and LED lamp. 23 GEAR FAN SPEED: Ceiling fan remote control kit includes a separate button for the 3 fan speed, which is designed to control the speed and light of the ceiling fan separately. Includes a wall bracket for manual remote control. 3SEPARATE CONTROL BUTTON: Includes 4 separate fan control buttons: 3 speed (high, medium and low) and shutdown. 4 separate adjustment and remote control timing buttons: 1h, 2h, 4h, 8h. 1 button is used to control the switch of the lamp (without attenuation). 4BEEP: Press and hold the stop button on the remote control to turn the beep on or off. The default setting is the activated beep. You can turn the beep on or off at any time. Please note that the receiver has no reverse function. 5EASY TO INSTALL: One remote controller can only control one fan by default, but after the remote controllers are paired again, one remote controller can control multiple fans. Very easy to install, blue to blue, white to white, black to black. 6SPECIAL NOTE: Replacement ceiling fan remote converts ordinary ceiling fan into remote control ceiling fan. Please note that this kit cannot support some fans that can only work with the original kit.Important: (product without battery) 1. Carefully check the size of the receiver to ensure that there is enough space on the fan awning to install the receiver. 2. No mechanical relay, no arc, no inrush current, zero crossing detection technology. 3. Only the lights can be turned on off without attenuation; And rotate the fan at low medium high speed. 4. The receiver has no reverse function. 5. The beep can be turned on or off by remote control at any time. Preventive measures: 1. The receiver should not be installed face down to avoid irregular ceiling and cover. 2. The receiver is divided into input and output. Do not change the input and output wiring at will (to prevent the circuit board from burning). 3. Operating voltage of the product: 90V?265V. 4. If there is a cable switch and remote control receiver on the fan, please pull the fan cable switch to the top of the light switch to turn on the light before the remote control. 5. Please refer to the of cable color and wiring sleeve (do not expose the core to cause short circuit). 6. When using the remote control, check whether the battery is installed (pay attention to the positive and negative poles of the battery). Every time the handle control key is pressed, the indicator light flashes once. Please allow some error due to manual measurement. 1 x Transmitter 1 x Receiver 1 x Transmitter Bracket