A set of 2 compatible rotary code remote controls, remote controls, and wall mounted transmitters for the engine 1. Replicable chips: 2260 (all suppliers), 2262 (all suppliers), PT2264, 5326 (all suppliers) SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all suppliers), 1527 (all suppliers), 2240 (all suppliers), HCS101, HCS200HCS201 (some codes), HCS300HCS301 (some codes), certain microcontrollers? Their< Br>1. Chips can be replicated 2260 (all manufacturers); 2262 (all manufacturers); PT22645326 (all manufacturers); SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series 527 (all manufacturers); 1527 (all manufacturers); 2240 (all manufacturers); HCS101, HCS200HCS201 (partial code), HCS300HCS301 (partial code), part of a single-chip microcomputer Br>2. Method for erasing code: Press and hold both the unlock and lock keys (some shells have two up and down keys) at the same time, the LED flashes three times, release one of the buttons, do not release the other, and click the release button three times. The LED enters a fast flashing state, at which point all memory data is erased. After erasing remote control data, No matter which key is pressed, the LED light does not light up< Br>2. Methods for cleaning code< Press the unlock button and lock button simultaneously (some shells have up and down buttons), and the LED light will flash three times. Release one of the buttons, and the LED light will not light up. While holding down another button, release one of the buttons, and then press the release button three times to enter the fast flashing mode of the LED indicator light. At this point, all data in the memory will be erased, and no matter which button you press, the cleaned remote control will not light up the LED indicator light. No matter which button you press, the cleaned remote control will no longer have indicator lights< Copy method: Hold the original remote control with one hand and the copy remote control with the other hand. Bring the two remote controls as close as possible and press the desired copy button separately. The LED indicator light will flash rapidly three times before flashing rapidly, indicating successful copying. The buttons work in the same way. Some remote controls have low transmitter power, and the original remote control and replica remote control must work back-to-back, only good replicas are possible. If the copying is not good, you must copy again after deleting the code. (Especially important: Your remote control must be working properly, with the same frequency as our remote control). Br>3. Copy method Hold the original remote control with one hand and the copy remote control with the other hand. The two remote controls should be as close as possible (ideally, the copy remote control should be placed in the same position). If possible (ideally, place two remote controls side by side on the desktop at zero distance), press the copy button separately, and when the indicator light flashes quickly, the copy button will be displayed. When the indicator light flashes rapidly after three flashes, the copy is successful, and the method of using the key is the same. Some remote controls have lower transmission power, so there is no need to place the remote control on a desktop. In the presence of noise, interference should be avoided. If the copy button is pressed, the LED light will flash rapidly after three flashes, indicating successful copying. If the replication is unsuccessful, it must be redone after deleting the code. The frequency of the remote control must be able to work and be the same as the C of the remote control< Br>4. The characteristics of the new replication remote control: Four buttons can replicate four different types of chips, that is, one remote control can operate four different types of installations. The frequency ranges from 270MHz to 434MHz, exceeding ten frequency points. Data replication speed is faster, there is no risk of code loss, and the distance is also large< 4) Features of the newly copied remote control: The four buttons can respectively copy four different types of chips, which means that one remote control can operate four different types of installations. The frequency ranges from 270MHz to 434MHz, exceeding 10 frequency points. Faster data replication speed, less likely to lose code, and longer distance. 5. Can replicate brands of regular garage doors, retractable d