Application It can be used for bending 0.8-2mm copper, aluminum, stainless steel tubes, etc. It is widely used for heating and sanitary installations, automotive repair, home improvement, and DIY projects. Key Features ✔Build to Last: Made of high-quality cast iron and steel, it is impact-resistant. The surface is sprayed and blackened for high strength, corrosion resistance, and extended service life. ✔Flexible Use: With 7 molds and 7 rollers, it is suitable for bending copper, aluminum, and stainless steel pipes with diameters ranging from 0.39in to 0.98in, and can meet a wide range of pipe installation and repair needs. ✔Easy Operation: You just need to fix the suitable molds and rollers on the main unit, then insert the tubes you need to bend and move the handle to do the bending. ✔U Molds: They ensure that each bend reaches the desired angle, making it easier to use with less effort. ✔Ergonomic Handle: It provides a more comfortable grip, making you less prone to fatigue even after long hours of work. Specification Model: SWG-25 Material: Cast Iron, Steel Color: Red, Black Process: Plastic Spraying, Blackening Operation Type: Manual Assembly Required: Yes Bending Range: 0-180°(U-shape) Type: Manual Bender Number of Molds: 7 Number of Rollers: 7 Applicable Pipe Thickness: 0.8-2.0mm/0.03-0.08in Bending Pipe Diameter: 10-25mm/0.39-0.98in Handle Length: 45cm/17.7in Main Body Length: 47cm/18.5in Mold Size: φ10mm/ 3/8in, φ12mm/ 1/2in, φ14mm/ 9/16in, φ16mm/ 5/8in, φ19mm/ 3/4in, φ22mm/ 7/8in, φ25mm/ 1in Package Size: 57*24.5*18cm/22.44*9.65*7.09in Gross Weight: 23.14kg/51.01lbs Net Weight: 20kg/44.09lbs Package Included 1* Manual Bender Main Body 1* Handle 1* English Manual 7* Molds 7* Rollers Notes  1.Please check compatibility carefully before purchasing. 2.Please wear protective gloves (not included) when operating to increase safety in use. 3.It can be used with a bench vise (not included). 4.Please read the instruction manual carefully before use and pay special attention to the safety tips inside. How to Use 1.Secure the base. 2.Select the appropriate mold and roller according to the required bending size. 3.Put the mold and host into the base shaft, and loosen the bolt and nut. 4.Put the roller into it and fixed. 5.Insert the pipe to be bent between the mold and the roller and set it into the mold lug holes. 6.Adjust the nut to fit the mold, tube, and roller. 7.Trigger the handle to bend.