D-Robotics RDK Stereo Camera is a binocular depth camera designed for RDK X5. It uses two 2-megapixel color cameras and is equipped with dual 22-pin MIPI interface output. Through optimized binocular depth algorithm and BPU calculation reasoning, efficient depth perception can be achieved, and the algorithm result rendering using rviz2 is supported on the PC. Using SC230AI chip and SmartSens SmartClarity-2 technology, it provides excellent day + night imaging effects (night imaging requires additional purchase of fill light) Onboard dual 2-megapixel cameras provide 178° ultra-wide-angle field of view Combined with optimized algorithms and BPU acceleration, efficient depth calculation is achieved<br><br>Suitable for artificial intelligence vision applications such as depth vision and stereo vision Support RDK X5 development board Pixels: 2 million Photosensitive chip: SC230AI Photosensitive element size: 1/2.8 inch Aperture (F): 2.2 Resolution: 1920x1080 (per channel) length (): 2.28 mm Field of view (FOV): 178° (bottom) 150° (horizontal) 80° (vertical) Distortion: Less than -30% length: 70 mm RESETB control: low effective I2C address: 0x300x32 Ioline: 0x50 Synchronization: support hardware synchronization Application scenarios: suitable for artificial intelligence vision applications such as deep vision and stereo vision Due to different batches, there may be differences in product appearance and printed text, which not affect use Colour:As Shown Material:PCB<br><br>Package Contents: 1 * Camera Module<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.