CP2112 highly integrated USB to SMBus bridge controller integrates a USB 2.0 full-speed function controller, USB transceiver, oscillator, and 8 GPIO pins. Via a simple GUI-based configurator, all customization and configuration can be selected, eliminating the need to develop complex firmware for standard HID class devices. Supplied with software and drivers. The CP2112 device enables fast USB connectivity with minimal development effort. 1. USB bus powered: 4.0 to 5.25V 2. Self-powered: 3.0 to 3.6V, I/O voltage: 1.8V to 5.25V 3. Operating temperature: -40°C to 85°C 4. On-chip reset circuit, on-chip voltage regulator: 3.45V output 5. Complies with USB specification 2.0 standard (12 Mbps) 6. Supports USB suspend state through SUSPEND pin 7. Integrated 194-byte one-time programmable ROM for storing customizable product information 8. 512-byte SMBus data buffer, configurable clock speed, device address with 7-bit value 9. HID to SMBus library for Windows and Linux for rapid application development; API and open access interface specification 10. 8 GPIOs configurable as input/output and open drain/push-pull for external devices Configurable clock output from 48 MHz to 94 kHz, read/write SMBus device with toggled LED indication 11. Application areas: portable controller, USB dongle, data recording Material: plastic + metal Color: purple Package Contents: 1 x module 2 x row pins Only the above package content is included; other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture to vary slightly from the real thing. Measurement may vary by +/- 1-3 cm.