1In the output status reminder area, you can view the output voltage, output current, output mode, etc 2With the functions of digital voltmeter and ammeter to meet your needs and give you a good experience 3Having the characteristics of small size, advanced functions, good visual effects and high accuracy 4With high operability, and can be used independently or embedded in the device to be widely used 5The main purpose is to stabilize the voltage, analog signal to digital signal, you can use the voltage regulator with confidence Item Type:Voltage Regulator Material: Resin Model: WDPS3220 Power Module Input Voltage: DC 6V-50V Power Module Output Voltage: DC 0-32V Power Output Current: 0.01A-15A Continuously Adjustable (please strengthen heat dissipation when the temperature exceeds 60, there are reserved 12v fan terminals) Display Input Voltage:6V-38V Display Output Voltage: 0-36V Continuously Adjustable (can only be used as a reduction voltage module, the input must be greater than the output 1V or more) Display Output Current: Adjustable, Maximum 5A Output Power: the Maximum 480W is Recommended to Be Used within 320W, Please Reduce the Power when Using Large Pressure Difference) Operating Temperature: -10~+75 (pay attention to the temperature of the power tube when using, please strengthen the heat dissipation if it exceeds, there are reserved fan installation positions and wiring terminals) Resolution Accuracy: Voltage 0.01V, Current 0.01A Conversion Efficiency: Up to 95% Short Circuit Protection: Support, Constant current currently set constant current value Input Reverse Connection: Support Output Backflow: None, Please Add a Diode for Charging Wiring Mode: Terminal VI+ is the Positive Input, VO+ is the Positive Output Module Size: Display Part: Approx. 79 x 43 x 46mm / 3.1 x 1.7 x 1.8in Power Board Part: Approx. 93 x 58 x 34mm / 3.7 x 2.3 x 1.3in Hole Size: Approx. 76 x 39mm / 3.0 x 1.5in Purpose: Stabilize Voltage, Convert Analog Signal to Digital Signal 1 xVoltage Regulator 1 x Display1.Ensure that the wiring is correct2.Please power off before installation3.This model does not have MODBUS function