The liquid level sensor has no special requirements for the type of liquid and container materials, and can be widely used. OOTDTYInformation is simple and does not affect production. The output signal is a PNP signal. Specifications:Product Model: XKC-Y26-PNP Input Voltage(Vin): DC 5-12VSoutput Voltage: PNP Current Consumption: 5mOutput Voltage(High Level): VinOutput Voltage(Low Level): 0V Output Current: 1 - 100mResponse Rate: 500mSToperable Ambient Temperature: 0 - 85°cHumidity: 5% - 100%Material: ABSodoresistance: IP65Size: 18x13x11mmCable Length: 45cmSensitivity:Tube Outer Diameter D(mm) Measuring Wall Thickness L(mm)Standard; 100, L: 20 ± 2100gt; 100 ge; 80, L: 15 ± 280gt; 100 ge; 60, L: 12 ± 260gt; 100 ge; 40, L: 7 ± 140gt; 100 ge; 30, L: 5 ± 130gt; 100 ge; 20, L: 3 ± 120gt; 100 ge; 10, L: 1.5 ± 0.5 Suitable pipe diameter: ge; 10mm Level Error: ± 1.5mm DescriptionThe intelligent type u level detector (hereinafter referred to as level detector) adopts advanced signal processing technology and high-speed signal processing chip, break through the effects of vessel wall thickness, realized the actual non-contact level height measurement in the closed vessel. Level sensor (probe) installed at the top and bottom (high level and low level) of the measuring vessel wall, non-metal vessel does not need to drill a hole, easy installation, good for production. It can be used for various kinds of toxic, strong acid, strong alkali and all kinds of level measurement in sealed vessel or high pressure vessel. The application of this product is very wide, there are no special requirements for liquid media and vascular materials. Product Feature1: XKC-Y26-PNP is suitable for non-metal pipe wall, and there is no need to make u with liquid, does not corrode by strong acid, strong alkali, and other corrosive liquids. It will not be affected by encrustation or other impurities.2: Intelligent level control and level memory function, level status display method, can realize multi-point serial connection, Feature: Achieves non-contact liquid level detection in a closed container. The liquid level sensor is installed on the top and bottom sides of the container (the liquid level is high and low)The non-metallic container does not need to open the opening. Can detect the level of various toxic substances, strong acids, alkalis and various liquids in sealed high pressure containersPackage included:1pc non-contact liquid level sensor1pc tie-down belt