Compatible with for / for series/for /for PS3/for switch controllers.Custom Button Layout, map at most 12 physical buttons to arbitrary logical buttons for .Rapid-fire,enable rapid-fire mode per each physical button.Persistent Configurations, store and restore at most 10 configuration sets of button layout, rapid-fire settings, and it's speedFirmware Updates,For bug fixes, or to improve compatibility, firmware updates are available.Twin stick Mode, When a for is connected to the 1P USB port, pushing PS button switch operation mode between the normal mode and the twin stick mode.MP07- -US is a board to connect USB gamepads to based arcade . For based system having standard power supply, video and audio outputs, such as exA-/ TypeX2,with the controller adapter, you can use standard USB gamepads to play games.Mahjong Mode,When a USB keyboard supporting boot mode, though almost all keyboards will support, is connected, switches to mahjong mode.USE Guide: Connect USB Type C port for power supply. It doesn't need data connection as it's just expected to suupply 5V power for . USB charger will be available. Of course, PC USB port can support the required power. PC-based system board could have a port for this use, e.g. exA- has USB ports. But if you want to use a device that requires much power, supplying via USB Bus from PC may not be enough and gets to be unstable. Connect port to the system board. You can use a general USB cable. Connect USB gamepads at any time. You can connect and disconnect even during the bus is active. When power is supplied, LED starts blinking. Once an address is assinged via bus, LED gets on. It will start blinking again if receives reset signal via JVS bus.Colour:BlackMaterial:PCB+MetalPackage Contents:1 * to USB ConverterOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.