Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

379,00 RON
+ 29,49 RON Livrare

Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

  • Marcă: Unbranded
Vândut de:

Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

  • Marcă: Unbranded
Preţ: 379,00 RON
Vândut de:
379,00 RON
+ 29,49 RON Livrare

În stoc

Acceptăm următoarele metode de plată

Descriere

Oxygen Inhaler Wall Entry Buoy Type Oxygen Filter Flow Meter Meter Oxygen Supply Parts Item Type: Oxygen Inhaler Flow Range: 1~10L/min, 1~15L/min Input and Output: 0. 4MPa~0.5MPa Exhaust Pressure of Safety Valve: 0.17MPa±0.05MPa How e:1. When using the inhaler, fill the inhaler bottle with distilled water first. It is forbidden to replace it with physiological saline. The water level in the inhaler bottle is between the upper and lower water levels. Tighten the inhaler bottle. 2. Before inserting the inhaler into the oxygen supply terminal socket, turn off the flow adjustment switch, and then insert the quick plug into the oxygen supply terminal socket hole. When you hear a "click" sound and see the oxygen supply terminal socket locking sleeve automatically slides , It means that the quick plug and the oxygen supply terminal socket have been connected and locked 3. Before supplying oxygen, insert the oxygen inhalation tube (purchased separately) into the oxygen supply connector, and then turn the flow adjustment switch counterclockwise to turn on the air source to make the float rise slowly (the scale line aligned with the center of the float is the flow reading, unit Is liters/min), the oxygen supply can be adjusted as needed 4. During the oxygen supply process of the inhaler, if the water in the inhaler bottle is lower than the water line, the flow adjustment switch should be closed in time, the humidification bottle should be unscrewed, and distilled water should be added according to the requirements of Article 1 of this item. Screw on the body of the inhaler and continue oxygen supply. 5. When the inhaler is out of use, the air source of the inhaler should be turned off; if it needs to be removed, hold the inhaler with one hand and unlock it with the other hand and then remove it (the unlocking method of the different oxygen supply terminal sockets is explained by the engineering installation unit ). Then pour out the water in the bottle for cleaning and disinfection, and store it in a non-corrosive gas and well-ventilated room.
  • ID Fruugo: 413728961-874299789
  • EAN: 4081337801405

Livrări şi Returnări

Expediat în 24 de ore

  • STANDARD: 29,49 RON - Livrare prin lun. 13 octombrie 2025

Livrare de la China.

Facem tot ce ne stă în putinţă să ne asigurăm că produsele comandate de dumneavoastră vă sunt livrate în întregime şi conform specificaţiilor. Cu toate acestea, dacă primiţi o comandă incompletă sau articole diferite de cele comandate, sau aveţi alt motiv pentru care nu sunteţi mulţumit de comandă, puteţi returna comanda sau orice produse incluse în comandă şi primiţi o rambursare completă pentru articole. Vizualizaţi întreaga politică de returnare

Detalii de conformitate a produsului

Vă rugăm să consultați informațiile de conformitate specifice acestui produs prezentate mai jos.

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Producător:
În continuare se prezintă informațiile de contact ale producătorului produsului relevant vândut pe Fruugo.

  • shenzhenshijiangjunfudianzishangwuyouxiangongsi
  • shenzhenshijiangjunfudianzishangwuyouxiangongsi
  • BantianjiedaoxiangjiaotangshequzhonghaogongyechengC2dongwuceng505
  • Longgangqu
  • Shenzhenshi
  • Guangdongsheng
  • China
  • 518000
  • Wallace22578@outlook.com
  • +8613084447403

Persoana responsabilă în UE:
În continuare se prezintă informațiile de contact ale persoanei responsabile din UE. Persoana responsabilă este operatorul economic desemnat, cu sediul în UE, care este responsabil pentru obligațiile de conformitate referitoare la produsul relevant vândut în Uniunea Europeană.

  • SUCCESS COURIER SL
  • SUCCESS COURIER SL
  • CALLE RIO TORMES NUM.1.PLANTA 1,DERECHA.OFICINA3.Fuenlabrada.
  • Madrid
  • Spain
  • 28947
  • successservice2@hotmail.com
  • +34910602659