The emulator of an immobilizer for motorcycles and scooters For -ha.<br> Works with all motorcycles and scooters For 'ha from 2006 to 2009.<br> Does not demand programmingonly need is connect wires.<br> Completely emulates work of a regular immobilizer, including light-emitting diode work on the instrument panel.<br> For emulator installation in the case of a regular immobilizer:<br> 1. Remove glue hermetic from the immobilizer case.<br> 2. Take out a PCB from immobilizer and desolder from it wires.<br> 3. Connect the emulator according to drawing more low.<br> 4. Insert the emulator into the immobilizer case.<br> Specification:<br> Black (2 pcs.) GND<br> Red with a green strip BATT (+12v)<br> Red with a white strip (+12v)<br> Blue LED (+5v)<br> Yellow with a blue strip K-line Immo-ECU<br> Note:<br> Installation guide not included, we strongly recommend you professional installation.<br> Please check as much as possible to make sure the item is what you need.<br> Tips: The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use<br> Colour:As Shown<br> Material:PCB<br> Package Contents:<br> 1 * Immobilizer Emulator for<br> Only the above package content, other products are not included.<br> Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.