Item Type: AVR Voltage Regulator Mode: AS440 Material: ABS Product Induction Input Voltage: 100-130VAC single line or 190-264VAC single line Power Input Voltage: 100-264VAC single line 50 60HZ Output Voltage: 200VAC at 82VDC Current: Continuous 4A, discontinuous 7.5A, lasting for 10s Typical System Response: AVR response 20ms 80ms when the excitation current reaches 90% 300ms when the machine voltage reaches 97% 1、SMT TECHNOLOGY: AS440 is a half wave phase controlled thyristor type AVR that is part of the brushless generator excitation system. The design uses surface mount technology (SMT) to achieve a premium degree of functional integration in a small size AVR. 2、LOW SPEED PROTECTION: The frequency measurement circuit continuously monitors the output of the generator and provides low speed protection for the excitation system by proportionally reducing the output voltage below a preset threshold. Manual adjustment is provided for factory set low frequency roll down points (UFRO). This can easily be changed to 50 or 60 Hz in live push link selection. 3、USE DETAIL: By using efficient semiconductors in the power supply circuit of the AVR, a positive voltage established from the residual level is ensured. The power and voltage detection circuits have separate terminals that allow excitation power to be obtained directly from the stator winding of the basic application, or from the auxiliary winding if continuous short circuit performance is required. 4、CONTROL DETAIL: Based on this sampling voltage, the AVR controls the power fed into the exciter magnetic field, thereby controlling the main magnetic field to maintain the motor output voltage within a specified limit. 5、ABS MATERIAL: Made of premium ABS material, this board is wear resistant and impact resistant, ensure a long life span and durability. 1 x AVR Voltage Regulator 1 x Manual