1、Metal gears are conducive to high‑torsion output of high‑power motors, sturdy and long lasting 2、Robot servo has high stability and can stably control the steering gear to work within a safe torsion range. Even if the fuse is blown, the steering gear can continue to work 3、Servo is perfectly compatible with remote systems such as Futaba, JR, Hitec, etc. 4、Robot servo can be widely used in robots, robotic arms, production lines, camera pan‑tilt control robots 5、The D‑hole anti‑skid key connection on the servo arm plate is compatible with the ASMC ASME servo axle, making the installation very simple 1 x Robotic Arm Servo1 x Connection Line Item Type: Robotic Servo MotorMaterial: Aluminum AlloyModel: ASME-04BMaximum Torsion: 380kg.cm (24V) (Actual Measurement, Not Theoretically Calculated Value) 3648N.cm(24V) (Actual Measurement, Not Theoretically Calculated Value) 190kg.cm(12V) (Actual Measurement, Not Theoretical Calculation Value) 1824N.cm(12V) (Actual Measurement, Not Theoretically Calculated Value) Angular Speed: 0.5s/60°( 0.5s is Needed for 60°Rotation), at 24V; 1.0s/60°( 1.0s is Required for 60°Rotation), at 12V;Rotation Angle: 300°MaxiumInput Mode: Pulse Signal (Remote Control, Multi-Channel Steering Gear Controller, Single-Chip Microcomputer) or Analog Voltage Signal (Potentiometer)Pulse Signal Input Range: 0.5ms- 2.5ms Suitable for All "Multi-Channel Steering Gear Controllers", "1ms-2ms Model Airplane Remote Control", "MCU Programming", Etc.; Voltage Signal Input Range: 0V to +5VControl Accuracy: 0.32°Rated Voltage: 12V~24V/DC (11V/Minium~30V/Maxium, Limit Voltage)No-Load Current: 500mA (Current Limit: 5A, Recommended to Use A Switching Power Supply or Battery Greater than 5A)Limit Angle: ±150° or 0°~300°(Maxium) The Steering Gear Has Electronic Limit AdjustmentAnalog Voltage Mode: 0V-5V Input Voltage ( 0.22V Corresponds to 0°, 4.78V Corresponds to 300°)Material: Gear and Shaft: Alloy Steel; Gear Box: Cast AluminumWeight: Approx. 550g / 19.4ozDimension Size: Approx. 95 x 60 x 110mm / 3.7 x 2.3 x 4.3inMechanical Life: >1,000000 Cycles/Full Load (Conservative Value)Limit ParametersLimit Voltage: 11V-30V/DC(Maxium)Current Limit Value: 5A± 0.2A(Maxium)Working Angle: ±150° or 0°~300°(Maxium)RC Mode: 1ms Pulse Mode: 1ms~2ms (Pulse Width)/50Hz~333Hz (Frequency) 2ms Pulse Mode: 0.5ms~ 2.5ms (Pulse Width)/50Hz~333Hz (Frequency)Analog Voltage Mode: 0V-5V Input Voltage 0.22V Corresponds to 0°, 4.78V Corresponds to 300°)