Motor Vehicle Sensors Specification: Part number: EV6T-1A180-CB EV6T-1A150-CB 1862980 EV6T-1A180-DB EV6T-1A150-DBEV6T-1A180-DC Operating Frequency: 433Mhz Battery Life: ABOUT 3 year Application: For Ford B-Max(from 2014-06 to 2018-12) ForFord C-Max(from 2014-03 to 2014-12) ForFord C-MAX(from 2014-03 to EOP) ForFord Ecosport(from 2014-10 to EOP) ForFord Escape(from 2014-03 to 2015-12) ForFord Expedition(from 2017-04 to EOP) ForFord Explorer(from 2017-04 to 2022-03) ForFord F-150(from 2014-03 to 2015-12) ForFord F-150(from 2015-03 to EOP) ForFord Fiesta(from 2014-05 to 2015-12) ForFord Fiesta(from 2016-01 to EOP) ForFord Fiesta Van(from 2014-03 to 2015-12) ForFord Fiesta Van(from 2014-06 to 2017-12) ForFord Focus(from 2010-12 to 2017-03) ForFord Focus(from 2014-03 to 2018-12) ForFord F-Series(from 2014-03 to 2016-12) ForFord F-Series(from 2015-01 to 2020-12) ForFord Ka+(from 2016-01 to EOP) ForFord Kuga(from 2012-11 to 2019-09) ForFord Kuga(from 2014-10 to 2021-09) ForFord Mondeo(from 2014-10 to 2017-08) ForFord Ranger(from 2014-06 to EOP) ForFord Tourneo Connect(from 2014-03 to EOP) ForFord Tourneo Courier(from 2014-10 to EOP) ForFord Transit(from 2014-06 to 2014-12) ForFord Transit(from 2014-06 to 2014-12) ForFord Transit(from 2014-06 to 2015-12) ForFord Transit Connect(from 2014-03 to EOP) ForFord Transit Courier(from 2014-10 to EOP) Package: 1 / 4 pcs TPMS sensor Note: 1.Please Use the vehicle fitment weve provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the part number or the pictureto us confirm it before order. 2.No sensor programming Required : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or re-learning. Simplified Relearn :OBDII required Installation of TPMS is recommended to be performed only by trained professionals. Tpms Reset Tutorial: Installation Process 1. Loosen the tire: Remove the valve cap and core and deflate the tire. 2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. 3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. 4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw. 5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. About After Sales Service: FAQ: Q: Did they tpms sensor need to make program A: The Tire Pressure Sensor come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or re-learning.