Learning: Press the learning button, the indicator flashes and turns off. Release the button, then press any button on the remote transmitter. The indicator flashes three times, indicating learning is successful. (Press the learning button according to the required working mode.)Clearing: Press and hold the learning button for about 8 seconds. The indicator flashes several times and then turns off. After this, pressing the remote button will not trigger a response from the relay, indicating the code has been cleared successfully.About Receiver: Model No.: AK-C211008 1. Working voltage: DC 12V36V 2. Quiescent current: Less than 6mA 3. Operating temperature: -40C to +80C 4. Receiver sensitivity: Better than -105dBm 5. Working frequency: 433MHz 6. Maximum load current: 10A Working Modes (selected via learning button): Momentary: Press the learning button once. Relay: Press and hold On; Release Off. Toggle: Press the learning button twice. Relay: Press On; Press the same button again Off. Latched: Press the learning button three times. Relay: Press On; Press another button Off. 2-Channel Momentary + 2-Channel Latched: Press the learning button four times. 2-Channel Momentary + 2-Channel Toggle: Press the learning button five times. 2-Channel Toggle + 2-Channel Latched: Press the learning button six times. About Transmitter: 1. Buttons: 4 2. Working voltage: DC 6V 3. Operating frequency: 433MHz 4. Remote control distance: 50100 meters 5. Operating current: 12mAh 6. Encoding: EV1527 code Remote Quantity: 2 pcs or 1 pc Color: White & Black Material: Plastic + Metal Package Contents: 1 x Remote Control Switch Receiver 2 x Remote Control Switch Transmitter OR 1 x Remote Control Switch Receiver 1 x Remote Control Switch Transmitter Note: The package includes only the items listed above. Other accessories are not included. Note: Lighting effects and display differences may cause slight variations in color between the image and the actual item. Measurement error allowed is +/- 13 cm.