Electronic Chlorine And Ph Tester For Swimming Pools - Water Quality Meter

199,00 RON
+ 30,49 RON Livrare

Electronic Chlorine And Ph Tester For Swimming Pools - Water Quality Meter

  • Marcă: Unbranded
Vândut de:

Electronic Chlorine And Ph Tester For Swimming Pools - Water Quality Meter

  • Marcă: Unbranded

199,00 RON

În stoc
+ 30,49 RON Livrare
Vândut de:

199,00 RON

În stoc
+ 30,49 RON Livrare

Acceptăm următoarele metode de plată

Descriere

" Chlorine test set point: Before first use, please set the tester for swimming pool water or hot spring water to be tested in the following order: 1. Use test tools traditional liquid for testing water swimming pool or hot spring water; 2. Record chlorine readings are available for use (1.5PPM) 3. No need to adjust pH. Find the tester set point: A. Put a 1.5V AA battery (positive side up) in battery slot on the handle. B. Hold the tester with one hand and the test rod with the other. C. Insert the cleaned metal rod into the water to the black position. D. Gently stir the water with a metal rod. E. When the metal rod is kept in the water, turn the knob on the front of the watch in the CL direction until it can no longer be moved. Then slowly adjust it to the right until the pointer points to the position of the result measured by the traditional liquid test tool (such as 1.5). F. Lift the test rod out of the water, being careful not to move the button. The pointer will slide to the right and stop with a letter between A and E. This letter is the point adjustment. Note: Before each chlorine test, the meter should be set to the set point. Test the pH value: The recommended chlorine content of swimming pool water or hot spring water is 7.2-7.8 A) Let the test stick stay in the water and turn the knob in the pH direction to beep (the battery must be removed when reading the PH). B) Wait for the pointer to stop swinging and take a pH reading. C) Gently dry the test stick, insert it into the slot next to the tester and store it. Test the chlorine content: The recommended chlorine content of swimming pool water or hot spring water is 1.2 to 1.7 ppm A) Set the pointer to the set point position ". B) Holding the tester in one hand and the test rod in with your other hand, insert the metal rod into the water to the black position. Wait for the pointer to stop swinging and take a reading. C) Leave the test stick in the water and continue to perform the pH test according to the instructions. specification 1. Essential tools for swimming pools, saunas and hot springs 2. The ideal tool for simply measuring the PH and C12 values of water 3. No chemical composition, no need to guess for the measurement 4. Chlorine content level within safe measuring range: 1.2-1.7 ppm 5. PH level in safe measuring range: 7.2-7.8 6. Battery: use 1 AA battery Storage method: In order to extend the life of the PC-101 Pool Tester and ensure accurate measurement, Please Note: 1. When not in use, please turn the knob to the closed position (in the PH direction until it can no longer be moved). 2. Store in a cool, dry place and avoid direct sunlight. 3. Do Do not immerse the test stick in any liquid other than swimming pool water and hot spring water. 4. Regularly check whether the battery power is sufficient - the tester uses an "" AA "" 1.5V "alkaline battery "
  • ID Fruugo: 171684865-367075911
  • EAN: 9101413142033

Informații privind siguranța produsului

Vă rugăm să consultați informațiile despre siguranța produsului specifice acestui produs prezentate mai jos

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Etichete de siguranță pentru produse

CE Mark

Livrări şi Returnări

Expediat în 24 de ore

  • STANDARD: 30,49 RON - Livrare între mie. 29 octombrie 2025–vin. 07 noiembrie 2025

Livrare de la China.

Facem tot ce ne stă în putinţă să ne asigurăm că produsele comandate de dumneavoastră vă sunt livrate în întregime şi conform specificaţiilor. Cu toate acestea, dacă primiţi o comandă incompletă sau articole diferite de cele comandate, sau aveţi alt motiv pentru care nu sunteţi mulţumit de comandă, puteţi returna comanda sau orice produse incluse în comandă şi primiţi o rambursare completă pentru articole. Vizualizaţi întreaga politică de returnare

Detalii de conformitate a produsului

Vă rugăm să consultați informațiile de conformitate specifice acestui produs prezentate mai jos.

Următoarele informații sunt furnizate de comerciantul independent terț care vinde acest produs.

Producător:
În continuare se prezintă informațiile de contact ale producătorului produsului relevant vândut pe Fruugo.

  • Shenzhen Liyuan E-commerce Co., Ltd
  • Shenzhen Liyuan E-commerce Co., Ltd
  • Room 408, Building B, Long Hui Industrial Park Dormitory,Fuqiao Industrial Zone 3, Fuyong Street, Baoan District,Shenzhen,Guangdong,China
  • Shenzhen
  • CN
  • 518000
  • kxguoguo0409@foxmail.com
  • 86 19330891093
  • https://www.fruugo.it/shenzhen-liyuan-e-commerce/m-17864

Persoana responsabilă în UE:
În continuare se prezintă informațiile de contact ale persoanei responsabile din UE. Persoana responsabilă este operatorul economic desemnat, cu sediul în UE, care este responsabil pentru obligațiile de conformitate referitoare la produsul relevant vândut în Uniunea Europeană.

  • Berrih Ethan
  • DISCOUNT INDUSTRY
  • 10 Rue Des Grands Pres, 60230 Chambly, Oise, France
  • Chambly
  • FR
  • 60230
  • DISCOUNT-INDUSTRY@outlook.com
  • 0033 748562127