433Mhz Wireless Rf 4 Channel Output Receiver Module And Transmitter Ev1527 Code

Specification: Transmitting power: 11dbm Emission current: 10MA Rate of fire: maximum 10KB / S Operating Voltage: DC 3V-24V Encoding : EV1527 1527 Learning code Each module has a unique ID address code. All modules K1-K4 four key code is the same. Working Voltage : DC3.3~5V Quiescent Current : ≤5mA Output current : 10 mA Working Frequency: 433MHz Receive Sensitivity: -108dB Working Temperature : -25~75 Working mode: Momentary Mode , self-locking (Toggle-Mode of the 4 Channels) , interlocking The output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons. [How to match the transmitter and receiver] 1. Delete existing data: Press learning button(on the receiver) 8 times. Response: LED flashes 7 times. 2. Learning remote code: press learning button(on the receiver) once, twice or three times (see below). LED turns on: learning mode is active. Press any button of the remote control. LED indicator flashes three times: learning successfully completed. 3. Test: after the above operation , the receiver board can be controlled by the remote control. More transmitters with different IDs can be learned and stored additionally, starting with step 2. A mixture of different modes is possible. Button usage (sets mode and starts pairing process): Press once: Inching mode (Momentary Mode) Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels) Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active) Package Included: 1 * Receiver Module 1 * Transmitter Module、 2 * Black rubber line Note: 1.Under the influence of light and the display, the color difference may decrease slightly. 2.Due to manual measurement, please allow size differences about 1-3cm. Thank you for your understanding The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.